Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
However, in any MIDI mode setting, actual operations on bank select will be suspended until the DTXTREME IIs receives a program change message that follows bank select data. • MIDI mode setting: native MSB=0 LSB=any value: normal voice MSB=127 LSB=any value: GM drum voice MSB=125 LSB=0: drum voice, preset kit1 MSB=125 LSB=1: drum voice, user kit MSB=125 LSB=2: drum voice, card kit *note 1 *note 2 *note 2 *note 2 • MIDI mode setting: GM MSB=0 LSB=any value: normal voice MSB=127 LSB=any value: GM drum voice *note 1 2.2.3 *note 1: The DTXTREME IIs only receives program numbers 1, 2, 9, 17, 25, 26, 33, 41 and 49 and selects a GM preset drum kit that corresponds to the received number. *note 2: The DTXTREME IIs selects a drum kit that corresponds to the received number. It is possible to select a drum voice for any MIDI channel (except 10). In this case, the drum map used for that voice is identical to that for MIDI channel 10. 1 modulation Reception only. 4 foot controller Supports both transmission and reception. 2.2.4 6 data entry Reception only. Used to specify RPN data. 2.2.5 7 main volume Supports both transmission and reception. 2.2.6 10 pan Supports both transmission and reception. 0 is the far left of a stereo image and 127 is the far right of a stereo image. 2.2.7 11 expression Reception only. 2.2.8 64 hold 1 Reception only. 2.2.9 71 harmonic content Reception only. 2.2.10 72 release time Reception only. 2.2.11 73 attack time Reception only. 2.2.12 74 brightness Reception only. 2.2.13 84 portamento control Reception only. 2.2.14 91 effect1 depth Reception only. Affects the reverb send level. 2.2.15 93 chorus depth Reception only. Affects the chorus send level. 2.2.16 100, 101 data increment/decrement Reception only. 2.2.17 RPN $00/$00 pitch bend sensitivity: Reception only. $00/$01 fine tuning: Reception only. $00/$02 coarse tuning: Reception only. $71/$71 NULL: Reception only. 2.3 Channel Mode Messages Reception only. 2.3.1 120 all sound off Mutes all the sounds currently playing through the specified channel. 2.3.2 121 reset all controllers Sets the following controller values back to its initial value: pitchbend, modulation, expression, hold1, portamento control, RPN number 2.3.3 123 all note off Mutes all notes through the specified channels currently playing. They will, however, not be muted until hold 1 is turned off. 2.3.4 124 omni off Operates as all notes off is received. 2.3.5 125 omni on Operates as all notes off is received. 2.3.6 126 mono Operates as all sounds off is received. 2.3.7 127 poly Operates as all sounds off is received. 2.4 Program Change When the “Receive pc” system parameter is set to off, the DTXTREAME IIs does not receive program change data. When the “Receive10 pc” system parameter is set to off, the DTXTREAME IIs does not receive program change data on MIDI channel 10. 2.5 Pitch Bend Supports both transmission and reception. 2.6 Channel Aftertouch Does not support transmission and reception. 2.7 Polyphonic Aftertouch Does not support transmission and reception. 3. System Exclusive Messages When the “receive system exclusive” system parameter is set to off, the DTXTREAME does not receive system exclusive messages. The DTXTREAME does not receive system exclusive messages that does not include the device number specified with the “device number” system parameter. 3.1 Parameter Change 3.1.1 GM system ON $F0 $7E $7F $09 $01 $F7 Sets all the data except the MIDI master tuning data to its initial value. Supports both transmission and reception. 3.1.2 XG system ON $F0 $43 $1n $4C $00 $00 $7E $00 $F7 n is device number. Operates as GM system ON is received. Reception only. 3.1.3 identify request $F0 $7E $0n $06 $01 $F7 n is device number. After this message is received, the DTXTREME IIs transmits identity reply. Reception only. 3.1.4 MIDI master volume $F0 $7F $7F $04 $01 $XX $mm $F7 XX is dummy (ignored). mm is the volume data. Reception only. 3.1.5 MIDI master tune $F0 $43 $1n $27 $30 $00 $00 $^ $ll $cc $F7 n is device number. Master tuning can be done by 128 cents which is specified by mm (MSnible) and ll (LSnible). Reception only. 3.1.10 parameter change $F0 $43 $7D $1n $44 $58 pi p2 p3 p4 datai (data2) $F7 n is device number (1 - F). Changes values for various parameters on the DTXTREME IIs. The parameter number specified with p1, p2, p3 and p4 is given a value specified with data1 and data2. If the target parameter belongs to other than a user stack, it takes 1 byte (no data2). If the target parameter belongs to a user stack (one of 4 elements that comprise a user voice), it takes 2 bytes (data1 and data2). In this case, data1 (MS7bit) and data2 (LS7bit) is combined to express a single value ($0000 - $3FFF). See Data Tables for the parameter number. Reception only. 3.2 Bulk Dump Bulk data is transmitted and received as follows: $F0 $43 $7D $0n $ss $ss $44 $54 $58 $54 t...