Votos - 3, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Use of the software and this guide is governed by the SOFTWARE LICENSING AGREEMENT which the purchaser fully agrees to upon breaking the seal of the software packaging. (Please read carefully the AGREEMENT at the end of this guide before installing the application.) • Copying of the software or reproduction of this guide in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. •Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this guide and the software. • Copying of the commercially available music data is strictly prohibited except for your personal use. • The company names and product names in this Installation Guide are the trademarks or registered trademarks of their respective companies. • Future upgrades of application and system software and any changes in specifications and functions will be announced separately. Important Notices about the CD-ROM Data Type The Supplied CD-ROM contains the USB MIDI driver software that can be used to logically connect the DTXTREME IIs to your personal computer, for playing it from the PC sequence software or for transferring DTXTREME IIs system exclusive data to the computer. Also, you can expand the built-in voice library of the DTXTREME IIs by copying the supplied waveform sample data to a Smart Media card. Never attempt to play back the CD-ROM on an audio CD player. Doing so may result in damage to your hearing as well as to your CD player/audio speakers. Operating System (OS) The applications in this CD-ROM can run on both Windows and Macintosh (PowerPC or higher) system. The installation procedure and the applications differs depending on the operating system that you are using. Please proceed to the appropriate installation instructions. . Windows . Read pages 1 through 4 . Macintosh . Read pages 4 through 5 For Windows Users Contents of the CD-ROM The CD-ROM contains a variety of applications (with their installers) listed below. Folder Name Application Name Contents USBdrv_ YAMAHA USB MIDI Driver Enables communication between the DTXTREME IIs and your computer via a (for Windows 98/Me) USB connection. USBdrv2k_ YAMAHA USB MIDI Driver (for Windows 2000/XP) SOUNDS User voices and waveform samples Subfolders in the SOUNDS folder contain user drum kits, waveform samples, user voices and so on. n Each file name extension indicates a specific file type .DAT : Waveform data exclusively designed for DTXTREME IIs. .OKT : User kit data Minimum System Requirements n Depending on your particular operating system, the actual minimum requirements may be higher than those specified below. USB MIDI Driver Computer: IBM/AT or compatible machine (with USB interface) OS: Windows 98/98SE/Me/2000/XP Home Edition/XP Professional CPU: Pentium (or Celeron)/166MHz or faster Available Memory: 32MB or more Free space in Hard Disk: 2MB or more n For information about hardware requirements other than the application above, refer to the on-line manuals of the relevant software. Software Installation USB MIDI Driver To operate the DTXTREME IIs from your computer via USB, you’ll need to install the appropriate driver software. The USB-MIDI driver is software that transfers MIDI data back and forth between sequence software and the DTXTREME IIs via a USB cable. . Windows 98/Me users See below. . Windows 2000/XP users See page 3. Windows Me 4. Click [Next]. The window below enables you to select the search method. . Installing the driver on a Windows 98/Me system 1. Start the computer. 2. Insert the included CD-ROM into the CD-ROM drive. 3. Make sure the POWER switch on the DTXTREME IIs is set to OFF and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the DTXTREME IIs. When the DTXTREME IIs is turned on, the computer automatically displays the “Add New Hardware Wizard.” If the Add New Hardware Wizard does not appear, click “Add New Hardware” in the Control Panel. n For Windows Me users, check the radio button to the left of “Automatic search for a better driver (Recommended)” and click [Next]. The system automatically starts searching and installing the driver. Proceed to Step 8. If the system does not detect the driver, select “Specify the location of the driver (Advanced)” and specify the CD-ROM drive’s root directory (e.g., D:\) to install the driver. Windows 98 5. Check the radio button to the left of “Search for the best driver for your device. (Recommended).” Click [Next]. The window below enables you to select a location in which to install the driver. 6. Check the “CD-ROM drive” box and uncheck all other items. Click [Next]. n The system may ask you to insert a Windows CD-ROM while it checks for the driver. Specify the USBdrv_ directory of the CDROM drive (such as D:\USBdrv_\) and continue the installation. n When using the Windows 98, specify the USBdrv_ directory of...