ENTRY ALL CH SEARCH 2 Press ENTRY ( / ) repeatedly to search for an XM channel within all channels. ENTER ENTRY ENTER y Hold down ENTRY ( / ) for quick search. y • Hold down ENTRY ( / ) for quick search. • To change the channel category, press CAT/A-E ( / ). • Select channel “0” to display your XM Radio ID number. 7 En English XM™ Satellite Radio tuning (U.S.A. and Canada models only) ¦ Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset the XM channels. For details, see “Presetting the XM™ Satellite Radio channels” on page 9. ¦ Direct Number Access mode 1 Press SEARCH repeatedly to select either “ALL CH SEARCH” or “CAT SEARCH”. 1 Press SEARCH repeatedly to select SEARCH “PRESET SEARCH”. SEARCH ALL CH SEARCH or PRESET SEARCH CAT SEARCH 2 Press CAT/A-E ( / ) repeatedly to change the preset channel group (A to E). 2 Press the numeric buttons (0 to 9) to enter the desired three-digit XM channel number. ENTER For example, to enter the number 123, press the numeric buttons 1, 2, and 3. CAT/ A-E 5BEAM ST+3BEAM 3BEAM 123 3 Press ENTRY ( / ) repeatedly to The front panel display changes as follows: change the preset channel number (1 to 8). ENTRY --1 ENTER y -12 You can also use the numeric buttons to directly input the preset channel number. 123 Notes • To enter a one- or two-digit number, press the corresponding number button(s), and press ENTER to confirm the number. If you do not press ENTER, this unit automatically confirms the entered number after a few seconds. • If you press a button other than the numeric buttons and ENTER during this operation, the Direct Number Access mode is canceled. 8 En XM™ Satellite Radio tuning (U.S.A. and Canada models only) Presetting the XM™ Satellite Radio channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 5 preset channel groups with 8 preset channel numbers each). You can then recall the preset channels easily by selecting the preset group and number as described in “Preset Search mode” on page 8. 1 Search for an XM channel that you want to preset. See “Basic XM™ Satellite Radio operations” on page 6 for details. [043] XMU Currently selected channel number y The initial factory setting for all preset channels is “[001] Preview”. 2 Press MEMORY. The MEMORY indicator flashes in the front panel display for about 10 seconds. MEMORY Flashes Note Operate steps 3 to 5 while the MEMORY indicator is flashing. 3 Press CAT/A-E ( / ) repeatedly to select a preset group while the MEMORY indicator is flashing. The selected preset group appears in the front panel display. ENTER CAT/ A-E Flashing 4 Press ENTRY ( / ) repeatedly to select a preset number while the MEMORY indicator is flashing. The selected preset number appears in the front panel display. ENTRY ENTER Flashing C8 [043] XMU Currently selected preset number 5 Press MEMORY or ENTER to assign the preset group and number to the selected XM channel while the MEMORY indicator is flashing. A colon (:) appears, and the MEMORY indicator turns off in the front panel display. MEMORY or ENTER C8: [043] XMU Colon (:) Note When you overwrite an existing preset channel, the previously stored XM channel information is cleared and updated. C [043] XMU Currently selected preset group 9 En English XM™ Satellite Radio tuning (U.S.A. and Canada models only) Displaying the XM™ Satellite Radio information You can display the XM Satellite Radio information (channel number/channel name, channel category, and artist name/song or program title) for the currently selected channel in the front panel display or in the OSD. Note If a status or error message appears in the front panel display or in the OSD, see the “XM Satellite Radio (U.S.A. and Canada models only)” in “Troubleshooting” on page 11. ¦ Displaying the XM channel information in the front panel display Press DISPLAY repeatedly to toggle between the following information displays. DISPLAY Channel number / Channel name Channel category Artist name / Song or program title When the channel number / channel name is displayed: [043] XMU When the channel category is displayed: ROCK When the artist name / song title is displayed: Coldplay / Spee y • You can set the front panel display mode: CONT. or ONCE. When ONCE is selected, the front panel display scrolls characters to the end once, after which the first 15 characters appear and stay. See “SCROLL” (Front panel display scroll) in “F.DISPLAY SET” (Front panel display settings) in the owner’s manual (page 88). • Undisplayable characters are displayed as spaces. ¦ Displaying the XM channel information in the OSD Press DISPLAY. The following screen is displayed in the OSD. DISPLAY XM INFORMATION ALL CH SEARCH XM :043 CHAN :XMU CAT :Rock NAME :Coldplay TITLE:Speed of sound .(Coldplay/Spe) [ ]/[ ]:CHANNEL [ ]/[ ]:CATEGORY y • To turn off the OSD, press DISPLAY again. • You can set the interval for which the OSD screen is displayed after an operation. See...
