Votos - 3, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
DECODE OFF SPORTS MY SUR. 5BEAM ST+3BEAM 3BEAM MUSIC MOVIE VOL MODE AUTO SETUP CAT FM/XM ENTRY CAT/ A-E 46321+1007895YSP TV/AV (U.S.A. and Canada models) 1 Set the operation mode selector to YSP. YSP TV/AV 2 Press SLEEP repeatedly to set the interval for the sleep timer. Choices: 120min, 90min, 60min, 30min, OFF The SLEEP indicator flashes in the front panel display while switching the interval for the sleep timer. SLEEP Flashes Each time you press SLEEP, the front panel display changes as shown below. SLEEP SLEEP 120min SLEEP 90min SLEEP 60min SLEEP 30min SLEEP OFF 3 Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator lights up in the front panel display, indicating that the sleep timer is activated. Lights up 72 En ¦ ¦ Using the sleep timer 1 Set the operation mode selector to YSP. YSP TV/AV 2 Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. SLEEP SLEEP OFF 3 Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated. Disappears Note The previous setting for the sleep timer before you deactivate it is stored in the system memory. y The sleep timer setting can also be deactivated if you press STANDBY/ON to set this unit to the standby mode or unplug the AC power supply cable from the AC outlet. BASIC OPERATION English 73 En Displaying the input source information Displaying the input source information ENHANCER MENU RETURNDISPLAY TV VOL VOLUME MUTE TV INPUT TV MUTE ENTER SUR. DECODE OFF CH ENTRY CAT/ A-E +100789YSP TV/AV (U.S.A. and Canada models) 2 Press DISPLAY. The information on the current input signal is displayed as follows: DISPLAY Lights up DVD AUTO or 1 Set the operation mode selector to YSP. YSP TV/AV DVD AUTO:DOLBY DGTL Input signal Indicator Sampling frequency Dolby digital DOLBY DGTL 32/44.1/48/64/ 88.2/96 kHz DTS DTS PCM PCM Analog ANALOG – y When the input signal is unclear, “___” is displayed for the sampling frequency. 74 En Using the HDMI control feature Using the HDMI control feature • Turning on or off the power (synchronized operation with the TV) • Selecting the audio output component (TV or this unit) • Adjusting the volume level (up/down and mute) An example of the HDMI control-compatible component is a Panasonic EZ Sync (for U.S.A. and Canada) or Viera Link (for other countries)-compatible component (TV, DVD recorder, Blu-ray recorder, etc.). y If you connect this unit to an HDMI control-compatible DVD player or Blu-ray Disc player via HDMI, you can also control the connected component in synchronization with this unit (except some models). 1 Connect this unit to your HDMI control-compatible TV via HDMI. For details about HDMI and HDMI components, see “Information on HDMI™” on page 21 and “Connections using HDMI cables” on page 22. Also in the owner’s manual supplied with your TV, refer to the information on connecting an AV amplifier. 2 Turn on the power of all components connected via HDMI. For details about controlling external components, see the owner’s manuals supplied with your components. 3 Check the system settings for all components connected via HDMI and activate the HDMI control feature. For details about setting external components, see the owner’s manuals supplied with your components. Once you have followed steps 1 to 3, you do not need to carry out the same procedure again next time. 4 Turn off the power of your TV and then turn on the power again. 5 Set the input source selector of your TV to this unit (HDMI, etc.). 6 Select the connected component as the input source by pressing INPUT on the front panel of this unit (or press one of the input selector buttons on the remote control). Confirm that the video image played back on the DVD recorder (etc.) appears in your TV correctly. 7 Use the remote control supplied with your TV to turn on or off the power, select the audio output component, and adjust the volume level of this unit. Notes • Check the following if you cannot operate this unit in synchronization with your TV. – Whether HDMI CONTROL is set to ON (see page 87). – Whether the HDMI control feature is activated for your TV (see the owner’s manual supplied with your TV). • While you are playing back audio from a non-HDMI component, turning off the power of your TV with the remote control supplied with your TV does not turn off the power of this unit. Playback continues without being affected. BASIC OPERATION English 75 En MANUAL SETUP MANUAL SETUP y • You can save the settings optimized by the AUTO SETUP procedure (see page 44). A set of settings optimized according to the specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment (see page 45). • Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP (see pa...