Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Installing software To use CL Editor, you’ll not need to install the other software program besides CL Editor. Follow the appropriate instructions below. CL Editor Installation Follow the instructions below to install the software programs. 1 Double-click “setup.exe” (Windows) or “Install CL Editor.pkg” (Mac) in the compressed file (you have downloaded). A setup dialog of CL Editor is displayed. NOTE When using Windows, if the “User Account Control” window appears, click [Continue] or [Yes]. 2 Follow the on-screen instructions to install the software. NOTE For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in program. CL Editor Installation Guide CL Editor Installation Guide 5 The following diagram shows how to connect the computer to the CL through a dedicated network. NOTE You cannot simultaneously control one CL unit from two computers running CL Editor. However, you can control the CL unit using CL Editor on a computer along with the CL StageMix application installed on an iPad (or iPad2) that is connected via WiFi. Connecting the computer to the CL LAN cable Computer CL console LAN cable Network switch or LAN cable CL Editor Network connector Network Setting s When you connect the computer to the CL through a dedicated network • Settings of the CL You can use the following initial settings. IP address 192.168.0.128 Gateway address 192.168.0.1 Subnet mask 255.255.255.0 • Settings of the computer We recommend that you make the following settings. IP address 192.168.0.100 Subnet mask 255.255.255.0 Default gateway (Router) 192.168.0.1 When you connect the computer to the CL in the existing network Make the network settings of the CL and your computer in accordance with your LAN. Please contact your network administrator for further details. For specific instructions and caution for connecting the CL to LAN, please refer to the following web site: • Settings of the CL IP address Set the IP address so that it does not conflict with the IP address of any other device on the network. Gateway address Set the IP address of the gateway when the gateway exists. Set the vacant address when the gateway does not exist. The address should be set in the same subnet as IP address within LAN in which the subnet is set. Subnet mask Set the subnet mask of the subnet connected to the CL. CL Editor Installation Guide TCP/IP Settings When using Windows 7 1 Select [Start].[Control Panel], then click or double-click [Network and Sharing Center] or [View network status and tasks]. The “Network and Sharing Center” is displayed. 2 Click [Manage network connection] or [Change Adapter settings] from the “Tasks” list located in the left side of “Network and Shareing Center” window, then double-click [Local Area Connection]. The “Local Area Connection Status” dialog box will be displayed. NOTE The “User Account Control” dialog box may appear. Click [Continue]. NOTE If the “Local Area Connection properties” dialog box appears, skip ahead to step 4. 3 Click [Properties]. The “Local Area Connection properties” dialog box will be displayed. NOTE The “User Account Control” dialog box may appear. Click [Continue]. 4 Select [Internet Protocol Version 4(TCP/IPv4)], then click [Properties]. The “Internet Protocol Version 4(TCP/IPv4) Protocol” dialog box will be displayed. 5 Click [Use the following IP address]. 6 Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. NOTE Please contact your network administrator for these settings when you connect the computer to the CL in the existing network. 7 Click [OK]. 8 Restart your computer. When using Mac OS X 1 Click the [System Preferences] icon on Dock. The “System Preferences” window appears. 2 Click the [Network] icon. The “Network” window appears. 3 Click [Ethernet]. The Ethernet settings appears. NOTE If there are multiple Ethernet choices, select the one that is connected to the device. 4 Select [Manually] in [Configure IPv4] or [Configuration]. Input the IP address of the computer in [IP Address], “255.255.255.0” in [Subnet Mask], and the IP address of the router (gateway) in [Router] individually. NOTE Please contact your network administrator for these settings when you connect the computer to the CL in the existing network. 5 Click [Apply]. The network settings are applied. CL Editor Installation Guide Uninstall (removing the installed application) To remove the installed Editor: When using Windows 7 Select [Start] . [Control Panel] . [Programs and Features] or [Uninstall a program], then select the application to be removed and click [Uninstall/Change]. Follow the on-screen instructions to uninstall the application. If the “User Account Control” window appears, click [Continue] or [Yes]. When using Mac OS X Double-click “Uninstall CL Editor.app” in the downloaded folder. After a dialog opens, follow the on-screen instructions to u...
Otros modelos de este manual:Instrumentos Musicales - CL1 (449.97 kb)
Instrumentos Musicales - CL5 (449.97 kb)