Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
q q COMM PORT This specifies whether the external head amp connected via the M7CL-48ES’s slot will be remotely controlled. To enable remote control, press the [SLOT 1] button to make it light. If you do not wish to use remote control, press the [NONE] button to make it light. • Remote control is not possible if the port that transmits or receives MIDI messages is specified as SLOT 1. To allow remote control, assign the MIDI port to other than SLOT 1. • For details on operation, refer to “Remotely controlling an external head amp” in the M7CL V3 owner’s manual. NOTE ALTERNATE function added You can now perform operations such as on/off by operating an encoder while holding down a user-defined key to which the ALTERNATE function is assigned. ALTERNATE mode is the state in which the user-defined key to which the ALTERNATE function is assigned has been pressed (i.e., is in the On state). NOTE • The ALTERNATE function lets you choose either LATCH or UNLATCH. If UNLATCH is selected, ALTERNATE mode will be on only while you hold down the user-defined key. If LATCH is selected, ALTERNATE mode will toggle on/off, allowing you to use the function without having to hold down the user-defined key. • ALTERNATE mode will turn off when you switch between the OVERVIEW screen and the SELECTED CHANNEL VIEW screen, when a popup window appears, and so on. • In ALTERNATE mode, “ALT” will be displayed as the user name in the function access area. In ALTERNATE mode, the following encoders will change their operation as described. • [HA] encoder Turn the encoder to adjust the attenuation value. If [ATT] is selected for HA KNOB FUNCTION in the PREFERENCE page of the USER SETUP popup window, the encoder will adjust the head amp gain. • [MIX/MATRIX] encoder Turn the encoder to switch the corresponding send between PRE /POST. Press the encoder to switch the corresponding send on/ off. • [HPF] encoder Press the encoder to switch the high-pass filter on/off. • [DYNAMICS 1] encoder Press the encoder to switch DYNAMICS 1 on/off. • [DYNAMICS 2] encoder Press the encoder to switch DYNAMICS 2 on/off. • In ALTERNATE mode, encoder functions in the SELECTED CHANNEL section other than those listed above are disabled. NOTE 6 Improved EQ operation Added a File Load option Improved EQ operation Added a File Load option If you have selected a LOW band or HIGH band whose type can be switched, you can switch the type by turning the EQ[Q] encoder while pressing it when the Q is set to the maximum or minimum value. LOW band: • When Q is at the minimum value, you can switch to LOW shelving by turning the encoder to the right while pressing it. • When Q is at the maximum value, you can switch the band to high-pass filter by turning the encoder to the left while pressing it (MIX, MATRIX, STEREO, and MONO channels only). HIGH band: • When Q is at the minimum value, you can switch to HIGH shelving by turning the encoder to the right while pressing it. • When Q is at the maximum value, you can switch the band to low-pass filter by turning the encoder to the left while pressing it. For shelving, high-pass filter, and low-pass filter as well, you can switch the type by turning the encoder while pressing it. You can now choose whether the AUTO CONFIGURE settings will be applied to the console when loading an M7CL settings file (*.M7C). This selection also applies when using the STAGE BOX DATA CONVERSION dialog box to convert and load a file. q q [WITH AUTO CONFIGURE SETTING] button If you press this button to turn it on, AUTO CONFIGURE settings saved in an M7CL settings file (*.M7C) will be applied to the console when the file is loaded. Other Changed index color of knobs in the screen The PRE/POST status is now indicated by the index color of the SEND LEVEL knobs shown in the OVERVIEW screen, the SELECTED CHANNEL VIEW screen, and the MIX/MATRIX SEND popup window. PRE (white) POST (black) 7 Yamaha Manual Library U.R.G., Pro Audio Division ©2010 Yamaha Corporation 012POTO-A0 Pri...
Otros modelos de este manual:Instrumentos Musicales - M7CL-32 (440.97 kb)
Instrumentos Musicales - M7CL-48 (440.97 kb)