Iniciar sesión:
Votos - 3, Puntuación media: 3.7 ( )

Manual de usuario Yamaha, modelo M2000-16

Fabricar: Yamaha
Tamaño del archivo: 3.43 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


When making this connection, ensure (as always) that the two phone connector are “in phase” (tip-tip, sleeve-sleeve). ig) AUX SEND connectors (1-6) Balanced, low-impedance, XLR-type male connectors. +4dB output Six post-AUX SEND control outputs. Wiring for these connectors is the same as for input channel connectors. The AUX OUTS can be used for effects send/return loops or for foldback. © GROUP OUT connectors (1-8) Balanced, low-impedance, XLR-type male connectors. +4dB output Eight post-GROUP fader outputs. © DC power input connector This connector is used to connect the locking umbilical cable to the PW2000M power supply. CAUTION: Always make sure that the power to the PW2000M is turned OFF before connecting or disconnecting this connector. Stereo channel connections © INPUT A Unbalanced 1/4 inch phone jacks. -20~+10dB If only one phone plug is inserted, into the L jack, the signal will be routed to both input channels. Only one pair of inputs, INPUT A or INPUT B will be operational at a time, determined by the position of the A/B selector switch for the channel. © INPUT B Unbalanced RCA connectors. -20~+10dB Inserting an RCA connector in only the L connector does not route signals to both channels. 22 Channel connections ©INPUT A Balanced, low-impedance, XLR-type female connector. -60~+10dB The wiring for all of these XLR-type connectors is as follows (DIN specification): Pin Signal 1 Ground 2 Hot (+) 3 Cold (-) Phantom power for condenser microphones (at +48V) may be supplied from each channel, and this may be selected individually for each channel by using the +48 V control on the front panel. See the sections on Input Channels for further details on phantom power. Using the 26dB pad and the GAIN control on each input channel, the gain of virtually any source — microphone or line — can be correctly matched. @ INPUT B Balanced, low-impedance, 1/4 inch phone jack. -60~+10dB The wiring for all INPUT B connectors is as follows: Otros modelos de este manual:
Instrumentos Musicales - M2000-24 (3.43 mb)
Instrumentos Musicales - M2000-32 (3.43 mb)
Instrumentos Musicales - M2000-40C (3.43 mb)


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría