Votos - 3, Puntuación media: 4.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
CH INPUT 1-4 MIC STEREO OUT GROUP OUT EFFECT/AUX (AUX1, 2*) SEND STEREO OUT GROUP OUT STEREO OUT EIN (Equivalent Input Noise): Rs = 150 ., GAIN: maximum –128 dBu STEREO OUT, GROUP Master fader at nominal level and all channels’ ST and 1-2 switches off. –88 Master EFFECT/AUX (AUX1, 2) control at nominal level and all CH EFFECT/AUX (AUX1, 2) controls at minimum. –81 STEREO OUT, GROUP Master fader and one CH fader at nominal level. –64 Residual Output Noise –98 Crosstalk (1 kHz) Adjacent Input Input to Output CHs 1-4 –70 dB STEREO L/R, CHs 1-4, PAN: panned hard left or right –70 Maximum voltage gain (1 kHz) All faders and controls are maximum when measured. PAN/BAL: panned hard left or hard right Rs = 150 . INPUT GAIN: maximum Rs = 150 . Rs = 600 . MIC to CH INSERT OUT 60 dB MIC to STEREO OUT 84 MIC to GROUP OUT MIC to GROUP to ST 94 MIC to REC OUT 62.2 MIC to MONITOR OUT, ST TO MONITOR 94 MIC to PHONES OUT 83 MIC to AUX (AUX1*) SEND PRE 76 MIC to AUX (AUX1*) SEND POST, EFFECT (AUX2*) SEND 86 CH 5/6, 7/8 LINE to STEREO OUT 58CH 5/6, 7/8 LINE to GROUP OUT CH 5/6, 7/8 AUX (AUX1*) SEND PRE 47 CH 5/6, 7/8 LINE to AUX (AUX1*) SEND POST, EFFECT (AUX2*) SEND 57 CH 9/10, 11/12 to STEREO OUT 34 CH 9/10, 11/12 to GROUP OUT RETURN to STEREO OUT 16 RETURN to EFFECT (AUX2*) SEND 9 2TR IN to STEREO OUT 27.8 Phantom Voltage MIC no load 48 V ¦ General Specifications Input HPF CHs 1-7/8, 80 Hz, 12 dB/oct Input equalization CHs 1-7/8 HIGH: 10 kHz (shelving) ±15 dB maximum Turn over/roll-off frequency of shelving: 3 dB blow maxi-CH 9/10-11/12 MID: 2.5 kHz (peaking) LOW: 100 Hz (shelving) HIGH: 10 kHz (shelving) mum variable level. LOW: 100 Hz (shelving) PEAK Indicator Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CHs 5/6, 7/8) reaches –3 dB below clipping (+17 dBu). Internal Digital Effect* 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect On/Off) LED Level Meter Pre MONITOR Level 2x12 points LED meter (PEAK, +10, +6, +3, 0, –3, –6, –10, –15, –20, –25, –30 dB) PEAK lights if the signal level reaches 3 dB below the clipping level. Power Supply Adaptor PA-20 AC 35 VCT, 0.94 A, Cable Length = 3.6 m Power Consumption 30 W Dimensions (W x H x D) 346.2 mm x 86.1 mm x 436.6 mm Net Weight 3.2 kg (MG124CX), 3 kg (MG124C) All faders are nominal if not specified. Output impedance of signal generator: 150 ohms * The MG124CX feature is described first, followed by the MG124C feature in brackets: MG124CX (MG124C) MG124CX/MG124C Owner’s Manual 67 Specifications Reference Specifications Reference Input Specifications Input Connectors Gain Input Impedance Appropriate Impedance Sensitivity * Nominal Level Max. before Clipping Connector Specifications CH INPUT MIC (CHs 1-4) –60 dB 3k. 50–600. Mics –80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV) XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) –16 dB –36 dBu (12.3 mV) –16 dBu (123 mV) +4 dBu (1.23 V) CH INPUT LINE (CHs 1-4) –34 dB 10k. 600. Lines –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) TRS phone jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) +10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) ST CH MIC INPUT (CHs 5/6, 7/8) –60 dB 3k. 50–600. Mics –80 dBu (0.078 mV) –60 dBu (0.775 mV) –40 dBu (7.75 mV) XLR-3-31 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) –16 dB –36 dBu (12.3 mV) –16 dBu (123 mV) –6 dBu (389 mV) ST CH LINE INPUT (CHs 5/6, 7/8) –34 dB 10k. 600. Lines –54 dBu (1.55 mV) –34 dBu (15.5 mV) –14 dBu (155 mV) Phone jack (unbalanced)+10 dB –10 dBu (245 mV) +10 dBu (2.45 V) +30 dBu (24.5 V) ST CH INPUT (CHs 9/10, 11/12) — 10k. 600. Lines –30 dBu (24.5 mV) –10 dBu (245 mV) +10 dBu (2.45 V) Phone jack (unbalanced) RCA pin jack CH INSERT IN (CHs 1-4) — 10k. 600. Lines –20 dBu (77.5 mV) 0 dBu (0.775 V) +20 dBu (7.75 V) TRS phone Jack (unbalanced [Tip = Out, Ring = In, Sleeve = GND]) RETURN (L, R) — 10k. 600. Lines –12 dBu (195 mV) +4 dBu (1.23 V) +24 dBu (12.3 V) Phone jack (unbalanced) 2TR IN (L, R) — 10k. 600. Lines –26 dBV (50.1 mV) –10dBV (0.316V) +10dBV (3.16 V) RCA pin jack Where 0 dBu = 0.775 Vrms and 0 dBV= 1 Vrms * Sensitivity : The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to the maximum level. (All faders and level controls are at their maximum position.) ¦ Output Specifications Output Connectors Output Impedance Appropriate Impedance Nominal Level Max. before clipping Connector Specifications STEREO OUT (L, R) 75. 600. Lines +4dBu (1.23 V) +24 dBu (12.3 V) XLR-3-32 type (balanced [1 = GND, 2 = HOT, 3 = COLD]) Phone Jack (balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) GROUP OUT (1, 2) 150. 10k. Lines +4dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) EFFECT/AUX (AUX1, 2*) SEND 150. 10k. Lines +4dBu (1.23 V) +20 dBu (7.75 V) Phone jack (impedance balanced [Tip = HOT, Ring = COLD, Sleeve = GND]) CH INSERT OUT (CHs 1-4) 75. 10k. Lines 0 dBu (0.775 V) +20 dBu (7.75 V) Phone jack (unbalanced ...
Otros modelos de este manual:Instrumentos Musicales - MG124CX (1.43 mb)