Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
The output jack is an EIAJ-standard 1/4" phone jack. Be sure to use an appropriate connection cable. The built-in preamplifier is automatically turned on when a plug is inserted into the output jack. When not using the instrument, or when playing it without amplification, be sure to remove the plug from the output jack so that the preamplifier power is turned off. Always set the VOL. control to “0” when plugging in or unplugging the connection cable. The battery check indicator (BAT.) will light briefly when a plug is inserted or removed from the output jack. This is normal and does not indicate a malfunction. Thank you for purchasing the YAMAHA Electric Acoustic Guitar. Incorporating a piezo pickup matched with a condenser microphone, this instrument achieves a realistically natural sound never before attained. A newly developed pre-amp section is utilized, designed to maximize the microphone's characteristics. The guitar's control section is simple, easy to use, and designed to fit any playing style. In order to make the most of the advanced features and performance provided by your guitar, please read this manual carefully before using the instrument. Model : Monaural 2 Way System : SYSTEM-40 Pickup : q Yamaha Custom Bar Sensor (Piezo type) Pickup by LR-Baggs w Condenser microphone Pre-amplifier VOL. Controls : BLEND EQUALIZER: BASS, HIGH, PRESENCE, MID AMF(Adjustable Mid Freguency) Output jack : Combination end pin/power switch Output impedance : 1 k. Power supply : 9V DC, S-006P(6F22) dry cell battery Battery life : Approx. 150 hours Accessory : 1 hexagonal wrench, Anti Feedback Sound Hole Cover (X1), S-006P (6F22) dry cell battery Battery Holder Control Section Output Jack (with power switch function) q Press the catch on the battery holder in the direction indicated by the arrow in the illustration q in order to unlock it. w Slide out the battery case. e Remove the old battery from the battery case, and insert the new battery making sure that the (+) and (–) terminals of the battery are positioned as shown in the illustration e. Use only a DC9V, S-006P (6F22) or equivalent battery. r Slide the battery case back into the battery holder and press firmly so that the battery case locks into place. Catch Battery case qVOL. Controls the instrument's volume. Volume is adjusted linearly from a level of 1 to 10 without any degradation in sound quality. * Always set the VOL. level to "0" before making any connections to the guitar's jack. w BAT. (Battery Check) Indicator When battery power is depleted the red LED will flash. In this condition, sound quality will not change however; the battery should be replaced with a new one as soon as possible. eEQUALIZER LOW : Adjusts the low frequency level (+/–12dB). HIGH : Adjusts the high frequency level (+/–12dB). PRES. : Adjusts the overtone level (+/–12dB). Adjusts the brilliance. rA.M.F. Control tMID Control Mid-range equalization is carried out by first selecting the center frequency with the A.M.F. (Adjustable Mid Frequency) knob. The MID knob can then be used to boost or cut (+/–12) the selected frequency. ADJUSTING SADDLE HEIGHT (only for CPX) String height can be adjusted at the bridge with the two adjuster screws located on either side of the bridge. With the strings loosened, rotate the adjuster screws to adjust string height. A half turn will result in approximately a 0.4 mm adjustment. • To raise the height of the strings > rotate the screw counter-clockwise (loosen the screw). • To lower the height of the strings > rotate the screw clockwise (tighten the screw). After adjustment of the string height is complete, tune the guitar. * When you lower string height, loosen the truss rod a little (convex or back-bowed). When you raise string height, tighten the adjusting rod a little (concave or up-bowed), fret buzz will stop. Reference: Factory setting • Saddle height : from the top of the adjustable saddle case: 3mm (+0.5,-0.5) • Adjustable saddle case height : from the top of the bridge face: 0.5mm (+0.7,-0.5) • String height : (measured at the 12th fret, from the top of the fret to the bottom of the string) 6th string : 2.6mm, 1st string : 1.8mm Lower string height Adjusting screw Adjusting screw Raise string height ELECTRIC ACOUSTIC GUITAR Owner’s Manual PRECAUTIONS DC9V S-006P (6F22) SPECIFICATIONS NOMENCLATURE Pickups: • Bar Sensor (Piezo Pickup) • Condenser microphone Sound Hole Cover (Accessory) Using the Sound Hole Cover Feedback often occurs when controls are boosted on the electric acoustic guitar to match the volume of other instruments when playing in a band. Another source of feedback results from using the BLEND control to increase the output from the internal condenser mic. When the instrument is used under the conditions described above, the Sound Hole Cover should be inserted into the sound hole. With the Sound Hole Cover in place, feedback is effectively reduced. THE CONTROLS By controlling the center frequency, more substance can be given to...