Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
It has two operating modes consisting of DMXand MASTER modes, which allows to receive and send DMX signals. In DMX mode, it features 4 channel individual DMX address setting. In MASTER mode, it is incorporated with 6 operating modes, MANUAL DIMMER, MANUAL PROGRAM, AUTO PROGRAM, HOLD SOUND, PROG SOUND and AUTO SOUND. In addition, multiple units can be connected to be used together, one as a DMX dimmer pack and the others as chase controllers. Also, STAND BY, FULL ON and PREHEAT functions are incorporated with this unit. Before operating this unit, please read this manual thoroughly.This manual will guide you through all functions step by step. TECHNICAL SPECIFICATIONS: POWER INPUT........................................................................................................................................ AC 120V~60Hz, 20A CHANNEL OUTPUT............................................................................................................................ 5A /CH., Total 20A max. FUSE.......................................................................................................................................................... F5A 250V 5x20mm DIMENSIONS.................................................................................................................................................. 1308x80x74mm WEIGHT.......................................................................................................................................................................... 4.0Kg OPERATING CONDITIONS ........................................................................................................... TEMPERATURE: 0--50°C RELATIVE HUMIDITY: . 85% PRODUCT INSTRUCTION: A. DMX mode When the DMX indicator is on, this unit is used as a DMX dimmer pack. 1. BUTTONS 1, 2, 3 and 4 Press any one of these 4 buttons, corresponding indicator will blink, and the DMX address of corresponding channel will appear in DISPLAY screen. Press UP or DOWN button to select desired DMX address followed by pressing corresponding channel button, corresponding indicator is off indicating information of entry is confirmed. then the information in DISPLAYscreen returns to initial condition.. 2. UP BUTTON Press to increase the display value. 3. DOWN BUTTON Press to decrease the display value. 4. F+ BUTTONS(Press F and buttons at a time.) Press to select L-- or R--. NOTE: L-- refers to data information of CH.1,CH.2, CH.3 and CH.4 corresponding to 1, 2, 3 and 4 output. R-- refers to data information of CH.1, CH.2, CH.3 and CH.4 corresponding to 4, 3, 2 and 1 output. 5. F+D/S BUTTONS(Press F and D/S buttons at a time.) Press to select CRO or NOR. NOTE: NOR refers to 0-100% dimming. CRO denotes only FULL ON and STAND BY are available.When dimming level is greater than 50%, FULL ON is activated, otherwise, STAND BY is effective. 6. F+MODE BUTTONS This function is effective only in MASTER mode. 7. F+PRESET BUTTONS Press to select available parameter information used with UP and DOWN buttons. PARAMETER FUNCTION F00-F99 FADE TIME(0-10S) PP 00-FF DIMMER(0-100%) E00-E25 PRESET MINIMUM DIMMING LEVEL(0-25%) 8. F+SIGNAL SELECT BUTTONS Press to select operating mode from DMX to MASTER mode, and the DISPLAY will show OUT. 24-004-0206 Rev 2.0 9. F+SIGNAL SELECT+RESET BUTTONS Press to perform a reset for the whole system, which enables to return to initial condition. 10. DMX indicator blinks when preheat is effective, otherwise lights. 11. SIGNAL indicator blinks when DMX signal is available and goes out when not available. B. MASTER mode When the MASTER indicator is on, this unit is used as a DMX chase controller. 1. BUTTONS 1, 2, 3 and 4 1. Press to enable to display desired channel dimming level, corresponding indicator will blink, then select desired dimming level using UP or DOWN button. These 4 buttons are effective only when MANUAL DIMMER indicator is on. Press F+PRESET buttons to withdraw from this condition, the indicator won't blink. 2. UP BUTTON Press to increase the display value. 3. DOWN BUTTON Press to decrease the display value. 4. F+ BUTTONS(Press F and buttons at a time.) Press to select L-- or R--. NOTE: L-- refers to data information of CH.1,CH.2, CH.3 and CH.4 corresponding to 1, 2, 3 and 4 output. R-- refers to data information of CH.1, CH.2, CH.3 and CH.4 corresponding to 4, 3, 2 and 1 output. 5. F+D/S BUTTONS(Press F and D/S buttons at a time.) Press to select CRO or NOR. NOTE: NOR refers to 0-100% dimming. CRO denotes only FULL ON and STAND BY are available.When dimming level is greater than 50%, FULL ON is activated, otherwise, STAND BY is effective. 6. F+MODE BUTTONS Press to select desired operating mode. This function is effective only in MASTER mode. The operating modes are changed in order of: MANUAL DIMMER MANUAL PROGRAM AUTO PROGRAM AUTO SOUND PROG SOUND HOLD SOUND 7. F+SIGNAL SELECT BUTTONS Press to select operating mode from MASTER to DMX mode, and the DISPLAY will show IN. 8. F+PRESET BU...