206) Song arrangements (S01–S05) These are arrangements whose data is rewritable, and up to 5 different arrangements for each song can be stored on memory cards. Memory Card BR-900CD Preset Arrangement Song Song Arrangement Using the Rhythm Switching the Rhythm Mode The Rhythm mode switches each time [ARRANGE/ PATTERN/OFF] is pressed. [ARRANGE/PATTERN/OFF]: Lit (Arrangement Mode) Performance and programming of arrangements is enabled. Press [PLAY] to start the performance of the arrangement. * Y

The Loop Phrase screen will appear. 2. Move the cursor to the EDIT icon and press [ENTER/ YES]. Alternatively, you can press [F2] (EDIT) if the EDIT icon is currently displayed. The Loop Phrase Edit screen will appear. 3. Move the cursor to the Loop Phrase number and select the phrase to be edited using the TIME/VALUE dial. 4. Move the cursor to “MEAS” (length in measures) or “BEAT,” and modify the setting using the TIME/ VALUE dial. 5. Move the cursor to the start or end position for playback o

Wiring diagrams for these connectors are shown below. Make connections after first checking the wiring diagrams of other equipment you intend to connect. 23 Chapter 1 Outputting Sounds Turning on the Power Chapter 1 Outputting Sounds Turning on the Power Before turning on the power, confirm the following. • Are all external devices properly connected? • Is the volume on the GT-10B, your amp, and all other connected devices turned down to the minimum level? Once the connections have been complete

* El conector INPUT funciona tambien como interruptor de alimentacion. La unidad recibe alimentacion electrica cuando se enchufa el cable en el conector INPUT y no la recibe cuando no esta enchufado. Para evitar un consumo innecesario de la pila, asegurese de desconectar el cable del conector INPUT cuando no vaya a usar la unidad de efectos. 5. Conector EXP Conecte aqui un pedal de expresion (Roland EV-5, BOSS FV-500L/FV-500H; no incluido). Al pisar el pedal cambia la cantidad de cambio del tono

Individual +---------------+ +-----------------------------+ *Refer to "Table WAH" 04 00 00 00 +---------------+ +-----------------------------+ | Quick Fx | | ROM Area (Data) | ... Read Only, Individual | | +-----------------------------+ *Refer to "Table Quick Fx Data" 05 00 00 00 | | +-----------------------------+ | | | ROM Area (Name) | ... Read Only, Individual +---------------+ +-----------------------------+ *Refer to "Table Quick Fx Name" 06 00 00 00 +---------------+ +-----------------

[WRITE] WRITE button [UTILITY] UTILITY button • Reference such as (p. **) indicate pages in this manual to which you can refer. * All product names mentioned in this document are trademarks or registered trademarks of their respective owners. Owner’s Manual Thank you, and congratulations on your choice of the BOSS GT-6 Guitar Effects Processor. Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4) These sections provide import

Press PARAMETER [ ] a number of times until the User Phrase settings screen is displayed. 5. Press PARAMETER [ ] [ ] to move the cursor, then rotate the PATCH/VALUE dial to set the User phrase. Step Pitch Length Sound Attack * When you want to place the currently set step at the very end, turn the PATCH/VALUE dial clockwise in the settings screen for the step that follows it (it does not matter which parameter is selected), until “---” appears in the bottom row of the screen. STEP Sets the step

OD/DS MOD DELAY 1 OVERDRIVE CHORUS 0-99ms DELAY 2 BLUES PHASER 100-700ms DELAY 3 DISTORTION FLANGER REVERB 4 METAL TREMOLO - 5 FUZZ ROTARY - 6 COMPRESSOR -- Blank Chart BANK NO. OD/DS MOD SOLO SW TYPE DRIVE TONE LEVEL SW TYPE RATE DEPTH LEVEL 1 1 2 3 1 2 2 3 1 3 2 3 1 4 2 3 1 5 2 3 1 6 2 3 1 7 2 3 1 8 2 3 1 9 2 3 1 10 2 3 Blank Chart Blank Chart EQ WAH NS MASTER LEVELSW TYPE TIME FEEDBACK LEVEL LOW LOWMID HIGHMID HIGH SW THRESHOLD Type List NO. OD/DS MOD DELAY 1 OVERDRIVE CHORUS 0-99ms DELAY 2 B

When set to “OFF,” the song is played at the tempo selected at the time. 3. Release [SHIFT]. * You can check the initial tempo settings in Song Play mode. Hold down [SHIFT] and press [VOICE] (INIT TEMPO). The initial tempo settings are displayed while [SHIFT] is held down. Chapter 4 Recording and Editing Songs (Song Edit Mode) <3A> Do Realtime Recording Here, select the pattern and then record it as it is being performed. * When recording over a song that has already been recorded, the newly rec

For example, if a sample contains noise, you can lower the volume of the region containing the noise, to make it less obtrusive. * The tonal quality may change if you perform this operation repeatedly. * While you are adjusting the volume of a specified region in the sample, the Play BPM setting will be ignored, and the sample will play at its original BPM (tempo). 1. Press the pad of the sample whose volume you want to adjust for a specified region. 2. Press [WAVE EDIT]. 3. Press [F2] (AMP). Th