* Use only the specified AC adaptor (PSA-Series). Panel Description 2. CHECK Indicator This indicator shows whether an effect is ON/OFF, and also doubles as the Battery Check indicator. The indicator lights when an effect is ON. * If this indicator goes dim or no longer lights while an effect is ON, the battery is near exhaustion and should be replaced immediately. For instructions on changing the battery, refer to “Changing the Battery” (p. 12). * The CHECK indicator shows whether the effect is

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. A battery is supplied with the unit. The life of thi

Using an AC adapter makes possible long performances with no worry about batteries going dead. GK IN Connector This connector is for connecting your guitar with a GK cable. NORMAL PU MIX Switch When Master is on, this switch determines whether or not the normal pickup sounds (or the sounds input to the GUITAR RETURN) are mixed. By mixing the normal pickup sound, you can create a sound that makes your guitar sound come alive. GUITAR OUT Jack Normal pickup signals input through the GK-2A are outpu

When switched off, the sound input to the INPUT jack is output without change. When set to “SLOW” When set to “FAST” Off Lit SLOW/FAST Pedal Switches the rotor’s rotation speed each time the pedal is pressed. 8 Operating the RT-20 Panel Operation For this description of using the pedals, first press the EFFECT ON/OFF pedal to switch on the effect (ON/OFF indicator lit), and press the SLOW/FAST pedal to switch the setting to SLOW (SLOW/FAST indicator off). In addition, set the knobs to the positi

The delay time can be set within the range of 200 ms to 1000 ms. PAN A panned delay in which the repeated sounds come alternately from the left and right channels. The delay time can be set within the range of 200 ms to 1000 ms. * When using the ME-50 in mono, the panning delay is not effective, even when PAN is selected. SPACE PAN This is a panning delay that gives an even wider spatial effect than PAN. The delay time can be set within the range of 200 ms to 1000 ms. * When using the ME-50 in m

To prevent that, replace the battery. AC ADAPTOR (OPTION) BOSS ACA 120 ► Be sure to keep the battery securely connected even while using the AC Adaptor, then the CE-3 will continued to operate even if the AC Adaptor cord comes out during performance. * Unplug the cord from the INPUT jack when the CE-3 is not in use to avoid wasting the battery. BOSS ACA 240 BOSS ACA 220 FOR 240V AC FOR 220V AC Power................Battery 9 V ( 1), AC Adaptor (BOSS ACA series) Power Consumption......13mA

Press the pedal to put the RC-2 into standby. The REC/PLAY/DUB indicator flashes rapidly Pressing the pedal once while the unit is in recording standby cancels recording. 4. Begin your performance. The RC-2 starts recording as soon as it receives audio input. 5. Press the pedal to stop recording. Playback of the recorded phrase begins simultaneously. 6. If you want to overdub onto the phrase, press the pedal. Each subsequent pedal press toggles between playback and overdubbing modes. * You can u

* The COMPRESSOR/LIMITER indicator goes off when this is set to OFF. NATURAL Provides natural-sounding performances with little thinning of the sound, even when pushing the effect. This is especially effective with slapping and hard picking. LIMITER Prevents distortion by suppressing the input signal level when it exceeds the set value. 160D SOFT Models the dbx 160 set to a lower compression ratio. 160D HARD Models the dbx 160 set to a high compression ratio. D-COMP Models the MXR DynaComp. THRE

For example, if a sample contains noise, you can lower the volume of the region containing the noise, to make it less obtrusive. * The tonal quality may change if you perform this operation repeatedly. * While you are adjusting the volume of a specified region in the sample, the Play BPM setting will be ignored, and the sample will play at its original BPM (tempo). 1. Press the pad of the sample whose volume you want to adjust for a specified region. 2. Press [WAVE EDIT]. 3. Press [F2] (AMP). Th