Iniciar sesión:
Votos - 5, Puntuación media: 4.6 ( )

Manual de usuario Vitek, modelo VT-3832

Fabricar: Vitek
Tamaño del archivo: 368.19 kb
Nombre del archivo:
Idioma del manual:ruen
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Микрофон 1. MIC set 2. Переключатель режимов работы 2. ON/MIC/OFF switch (ON/MIC/OFF) 3. Microphone 3. Корпус микрофона 4. Antenna 4. Антенна 5. Antenna 5. Антенна 6. Power indicator 6. Индикатор работы 7. ON/ OFF switch 7. Переключатель режимов работы 8. Battery case (ON/ OFF) 9. Body of receiver 8. Отсек для источника питания 10. Tip for connection элемент " АА" 9. Корпус приемника 10. Штекер для подключения в микрофонный вход It is very happy that you have this professional wireless micro SPECIFICATIONS: phone of good quality which will bring you into a word where you Microphone sensitivity 72 dB can sing happily and freely to your heart's content so that you Directivity unidirectional enjoy it admiringly. Frequency response 109 to 120 MHz Output impedance 600ohm HOW DO YOU OPERATE IT: Operating voltage 3 V or1.5V DC 1. Screw off the housing insert a battery (size AA) with the correct Effective distance 15 to 30 M polarity and screw on the housing before inserting the tele scopic antenna and set the switch to the ON position The pilot ACCESSORIES: lamp is on at this time. Insert another battery (size AA) into the 1. 1 receiver receiver with the correct polarity, Set the switch of receiver to 2. 1 Wireless antenna On position, then the pilot lamp is on that indicate a good con 3. 1 wire for wired microphone dition. After that, plug the receiver into the input socket for microphone of amplifier and it is ready for operation. SERVICE LIFE OF THE MICROPHONE 2. When you need temporary stop during singing and you don't NOT LESS THAN 3 YEARS want the microphone to pick up and other sound you may set the switch to the middle (MIC) position. Now, the lamp is still on but your microphone doesn't transmit any sound. 3. Use is as wired microphone: Take out the battery form the microphone, connect the wire to the microphone and set the switch to MIC position. ATTENTIONS: 1. If acoustic quality and volume are abnormal or receiving dis tance is shorted, the batteries in wireless microphone and receiver should be replaced, if there after still not in normal operation, you can carefully trim the frequency of receiver with a screwdriver to become normal operation. 2. If your microphone isn't used for a ling period, the battery should be taken out to avoid its deterioration and the damage of components. 3. If two wireless microphones are used at the same time, you must use them switch one red and another green lamp and can't use them with the lamp of the same color. 3832.12.01.04 10:Page 2 РУССКИЙ РУССКИЙ КАК ПОЛЬЗОВАТЬСЯ МИКРОФОНОМ 1. Не устанавливая телескопическую антенну, снимите закрепленный на винтах корпус и установите внутрь батарею типа АА, соблюдая полярность. После установки корпуса установите телескопическую антенну. Переведите выключатель в положение ON. Загорится контрольная лампа. Установите другую батарею типа АА в ресивер, соблюдая полярность. Переведите выключатель ресивера в положение ON. Загорится контрольная лампа, что будет означать нормаль...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría