Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Channel Selectivity . 67 dBm Intermodulation . 62 dBm Noise Reduction Expander (TOKO) Audio Output -22 dBm (balanced) @ 1 kHz ± 40 kHz Output Impedance 2 k . (balanced) S/N Ratio 57 dB (± 5 kHz) Power Reqirement 2 “AA” Batteries (Alkaline) - 6-8 hours runtime Dimensions 63W x 98H x 27D mm 2.48W x 3.86H x 1.06D inches Weight .180 g (6.35 oz) w/batteries 15BT Belt-pack Transmitter RF Power 25 mW Antenna 1/4 wavelength Frequency Response 50 Hz - 15 kHz Reference Deviation ± 5 kHz (-60 dBm - 1 kHz input) ± 40 kHz max deviation Noise Reduction Compander (TOKO) Power Reqirement 2 “AA” Batteries (Alkaline) - 6-8 hours runtime Dimensions 63W x 98H x 27D mm 2.48W x 3.86H x 1.06D inches Weight .160 g (5.64 oz) w/batteries Supplied Mic Clip-on ECM Lavalier 15HT Handheld Transmitter RF Power 25 mW Antenna 1/4 wavelength (internal) Frequency Response 50 Hz - 12 kHz Reference Deviation ± 5 kHz (-60 dBm - 1 kHz input) ± 40 kHz max deviation Noise Reduction Compander (TOKO) Mic Element ECM Power Reqirement 2 “AA” Batteries (Alkaline) - 6-8 hours runtime Dimensions 230H x 44D mm 9.05H x 1.73D inches Weight .130 g (4.58 oz) w/batteries 15XT Plug-in Transmitter RF Power 25 mW Antenna 1/4 wavelength (internal) Frequency Response 50 Hz - 12 kHz Reference Deviation ± 5 kHz (-60 dBm - 1 kHz input) Noise Reduction Compander (TOKO) Power Reqirement 2 “AA” Battery (Alkaline) - 6-8 hours runtime Dimensions 40W x 112H x 40D mm 2.48W x 3.86H x 1.06D inches Weight .180 g (6.35 oz) w/batteries 105 SYSTEM User’s Guide 105UPR • 15BT • 15HT • 15XT ON-CAMERA UHF WIRELESS MICROPHONE SYSTEM Due to constant improvements, specifications are subject to change without notice. Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010 tel - +1.516.328.7500 • fax - +1.516.328.7506 • email - sales@azdencorp.com © 2008 Azden Corporation Printed in USA P1-70-03 5 8 Operating the system Because this is a frequency agile system, the receiver and transmitter must both be on the same Receive/Transmit frequency. Follow the instructions #5, 16, 24 and 27 carefully. Make sure both the receiver and the transmitter are on the same channel. 105UPR Receiver After installing new batteries, mount the receiver to your video camera with the supplied shoe-mount or hook and loop fastener. Connect the output cable to the receiver and to the microphone input on the video camera. Switch the 105UPR to “ON” and the power indicator (7) should come on RED. If it doesn’t, check the batteries. When the 105UPR receives a signal from the transmitter the LED indicator will change to GREEN. If it does not, make sure both the receiver and the transmitter are on matching Receive/Transmit frequencies. 15BT Transmitter Plug in the supplied microphone and clip it to your subject. The microphone should be placed 4-12 inches from your subject’s mouth. Clip the transmitter to a belt using the supplied belt-clip or place it in a pocket. Switch the 15BT to “ON” and the power indicator should come on. If it d...
Otros modelos de este manual:Auriculares y micrófonos - 105UPR (521.99 kb)
Auriculares y micrófonos - 15HT (521.99 kb)
Auriculares y micrófonos - 15XT (521.99 kb)