Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
(7) LED indicator This LED turns RED when the receive is turned “ON” and GREEN when receiving a signal from the transmitter. HANDHELD MICROPHONE/TRANSMITTER (15HT) (25) Remove the battery compartment cover by rotating it counterclockwise and sliding it down. (26) Insert two fresh Alkaline “AA” batteries into the compartment. Make sure the battery polarity is correct as marked inside the battery compartment. Inside the battery compartment you will also find #27 and #28 (27) MIC LEVEL Control The MIC LEVEL control enables you to adjust the audio level of the micro phone. Using the supplied tool, turn the dial clockwise to increase, or counterclockwise to decrease the microphone’s audio output level. (28) Frequency Selection Frequency adjustment is accomplished by setting the controls inside the bat- tery compartment. With the frequency GROUP dial on the left (column A on the included chart) you can select any of 10 frequency groups (numbered 0-9). With the frequency CHANNEL dial on the right (column B on the included chart) you can select any of 10 frequency channels (numbered 0-9). There are actually 92 possible selections. (8) Phone Output Adjustment Using the supplied tool, turn the screw clockwise to increase and counterclock- wise to decrease the audio level presented at the earphone monitor jack. (9) Shoe-mount Attach the 105UPR to the shoe-mount on the video camera by sliding it into place. Turn the thumb-wheel clockwise to tighten and counterclockwise to remove. (10) Antenna For best reception the antenna should be pointed in an upward fashion. Use caution and do not force it in this position. BODY-PACK TRANSMITTER (15BT/EX-503L) (11) Remove the battery compartment lid by sliding it down. (12) Insert two fresh Alkaline “AA” batteries into the compartment. Make sure the battery polarity is correct as marked inside the battery compartment. Inside the battery compartment you will also find #13 and #16 (13) MIC LEVEL Control The MIC LEVEL control enables you to adjust the audio level of the micro phone. Using the supplied tool, turn the dial clockwise to increase, or counterclockwise to decrease the microphone’s audio output level. (16) Frequency Selection Frequency adjustment is accomplished by setting the two controls inside the battery compartment. With the frequency GROUP dial on the left (col- umn A on the included chart) you can select any of the 10 frequency groups (numbered 0-9). With the frequency CHANNEL dial on the right (column B on the included chart) you can select any of 10 frequency channels (numbered 0-9). There are actually 92 possible selections. (14) POWER This switches the transmitter “ON or “OFF” (15) MIC Input Jack Plug the supplied EX-503L microphone into the MIC jack and tightened the collar until it is snug (DO NOT OVERTIGHTEN). In addition to the EX-503L, other lapel and/or headset microphones with 3.5mm plugs can also be used with the 15BT. (17) Audio Standby The Audio Standby switch serves as a mute switch. In the S...
Otros modelos de este manual:Auriculares y micrófonos - 15BT (521.99 kb)
Auriculares y micrófonos - 105UPR (521.99 kb)
Auriculares y micrófonos - 15XT (521.99 kb)