Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
Stereo Mini-Jack Connector for use with ELAN Communication Controllers or equivalent 5 IR Receiver Inputs Flip Lock Connectors for IR receivers or DLA Touchpads. IR receivers allow for individual room control or system-wide control using DLA discrete IR codes.* 6 Speaker Outputs 4-position Fliplock Connectors for 16 Gauge, 4 Conductor (16/4 AWG) Speaker Leads to Room Speakers 7 Impedance Match DIP Switches Select The Impedance Value Of the Ampli- er And Speakers, 4 Or 8 Ohms 8 ATON Port Connects to Optional RF Receiver 9 Ampli er/Receiver Input 4-position Fliplock Connector for 16 Gauge, 4 Conductor (16/4 AWG) Speaker Leads From Ampli er or A/V Receiver Speaker Outputs • 125 Watts per Channel Max Table 1-2: Rear Panel Connectors * IR codes available for download at: See Appendix C-3. © 2008 • All rights reserved. 7 DLA2/4/6 Speaker Level Audio Router 2. System Design Overview There are four typical system applications when installing the DLA2/4/6: 1. Standard A/V or Stereo Receiver 2. Zone 2 Output of an A/V Receiver 3. External Ampli er 4. Sub-Zone of a Multi-Room Controller Figure 2-1 shows a DLA2 connected to an A/V receiver with optional ATON accessories including optional AIR3 IR Receivers, AIE2 IR Emitters and a DLA2RKT RF remote Kit. This system is capable of house-wide control of the DLA2 through the RF Kit as well as Room 1 and Room 2 control using the included IR Remote. A universal remote or source remote can be used to control the DLA 2/4/6* as well as the equipment connected to the IR EMITTER OUTPUTS for even more convenience. CLASS 2 WIRING IR EMITTER OUTPUTS IMPEDANCE MATCH RF INPUT PATENT PENDING PWR IN 12VDC / 2.1A SENSE INPUT 9VDC / 100mA 8 8 4 4 AMPLIFIER INPUT 1 PAGE/DB TRIG IN AIR3 IR Receivers (Optional) DLA2 A/V Receiver A/V Receiver Satellite DVD AIE2 IR Emitters (Optional) Room 1 Speakers Room 2 Speakers 16/4 Speaker Cables 16/4 Speaker Cables Included IR Remote Control (Controls DLA2/4/6) + - L R L R OUT Room 1 Room 2 OUT Main Speakers RF Receiver (Optional) Universal/Source IR Remote Control ROOM 1 ROOM 2 ALL ON ALL OFF SCENE VOL + - MUTE VOL DLA2RKT RF Remote Kit (Optional) 16/4 Speaker Cables Figure 2-1: System Overview * DLA discrete IR codes available for download at: See Appendix C-3. 8 ©2008 • All rights reserved. DLA2/4/6 Speaker Level Audio Router Standard Audio/Video or Stereo Receiver Most A/V Receivers and Stereo Receivers have two sets of Main Speaker Outputs (typically labelled “A” and “B”. While it is certainly possible to connect the DLA2/4/6 to the “A” outputs, it is much more useful to connect the “A” outputs to the main speakers (stereo or surround) in the room in which the receiver is located and connect the “B” outputs to the DLA2/4/6 in order to expand the audio system to additional areas. Figure 2-2 shows the “B” speaker outputs of an A/V receiver connected to to the AMPLIFIER INPUT of the DLA2. A pair of speakers are connected to the DLA2’s Room 1 Speaker Outputs, while an additional pair of speakers is connected to the Room 2 Speaker Outputs. In this scenario, the A/V receiver’s speakers play in the main listening area, while two additional pairs of speakers play in other areas of the home. This is a single-source application: all areas of the house will play the same audio source, but with separately controlled volume. Note: For best audio quality, ATON recommends that Surround Sound and/or DSP modes (Concert, Hall, Jazz, etc.) be disabled prior to playing audio through the DLA2/4/6. CLASS 2 WIRING IR EMITTER OUTPUTS IMPEDANCE MATCH RF INPUT PATENT PENDING PWR IN 12VDC / 2.1A SENSE INPUT 9VDC / 100mA 8 8 4 4 AMPLIFIER INPUT 1 PAGE/DB TRIG IN DLA2 A/V Receiver Room 1 Speakers (B) Room 2 Speakers (B) 16/4 Speaker Cables 16/4 Speaker Cables + - L R L R A Main Speakers (A) B Figure 2-2: DLA2 with A/V Receiver Output B Overview © 2008 • All rights reserved. 9 DLA2/4/6 Speaker Level Audio Router Zone 2 Output of an A/V or Stereo Receiver Certain A/V Receivers and Stereo Receivers have a Zone 2 feature that allows them to play a seperate source to a second zone. Figure 2-3 shows the Zone 2 speaker outputs of an A/V receiver connected to to the AMPLIFIER INPUT of the DLA2. Like the previous example, a pair of speakers are connected to the DLA2s Room 1 Speaker Outputs, while an additional pair of speakers is connected to the Room 2 Speaker Outputs. This application allows the A/V receiver’s Main speakers to play in the room in which the receiver is located, while two additional pairs of speakers play in other areas of the home. This is a multi-source application: the Main speakers may play one source, while Zone 2 (the DLA2 locations) plays a different source. Note: Set the Zone 2 volume level to the point where it achieves the maximum listenable level (prior to distortion). The DLA2/4/6’s volume level will adjust up to this maximum level. IR EMITTER OUTPUTS IMPEDANCE MATCH RF INPUT PATENT PENDING PWR IN 12VDC / 2.1A SENSE INPUT...
Otros modelos de este manual:Altavoces - DLA2 (885.85 kb)
Altavoces - DLA4 (885.85 kb)
Altavoces - DLA4 (885.85 kb)