Votos - 2, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
2Gently push the PC Card slot into the connector. The PC Card is automatically detected by your system. The Safely Remove Hardware icon appears in the system tray. . Some devices may not function properly if you repeat returning to Normal mode from Standby mode or Hibernate mode. The computer will return to its original state if you restart it. If your computer has two PC Card slots, the PC Card slots can accommodate (at the same time) two Type I, two Type II or one Type III PC Card. These slots are compatible with Card Bus ports. If your computer has two PC Card slots, use the lower slot for PC Type III cards. Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony computer Setup to disable devices. Make sure you use the most recent software driver provided by the PC manufacturer. If an “! ” mark appears on the Device Manager tab in the System Properties dialog box, remove the software driver and then reinstall it. You do not need to shut down the computer before inserting or removing a PC Card. Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC Card in the correct direction. See the manual supplied with your PC Card for more information on use. For some PC Cards, if you alternate between Normal power operation and Standby or Hibernate power management modes while the card is inserted, you may find that a device connected to your system is not recognised. Restart your system to correct the problem. Do not carry your computer while touching the head of a PC Card, as pressure or shock may damage the connector pins. If you computer has two PC Card slots, it is recommended that you always use the same slot for a PC Card as switching slots can cause problems with some PC Cards. Removing a PC CardFollow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 7. To remove a PC Card, proceed as follows: 1Double-click the Safely Remove Hardware icon in the system tray. The Safely Remove Hardware dialog box appears. 2Select the hardware you want to unplug. 3Click Stop. 4In the Stop a Hardware Device dialog box, confirm that the device can be safely removed from the system. 5Click OK. A dialog box appears, explaining that it is safe to remove the device. 6Click OK. 7Click Close. 8Push the PC Card release button so that the release button pops out. 9Push the PC Card release button a second time so that the PC Card pops out. 10Gently take hold of the Card and pull it out of the slot. 11If the PC Card release button is still out, push it back in to close the front panel cover. . If you unplug the PC Card from the computer when it is still turned on, your system might crash and you might lose data that you did not save before. Before you remove the PC Card, click the PC Card icon in the taskbar and close the card. Close any applications that use the PC Card before removing the card. Otherwise, data may be lost. While the card is inserted, your computer may not enter the Hibernate power management mode. It may enter Standby mode. It is recommended that you remove the card before your computer enters Hibernate mode by pressing the
Notebooks - VGN-S1HP (1.06 mb)
Notebooks - VGN-S1XP (1.06 mb)