Votos - 1, Puntuación media: 4 ( )

Fabricar: iOptron Tamaño del archivo: 574.13 kb Nombre del archivo: Idioma del manual:

However all scopes will attach in the same manner.) iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569.0200 | Toll Free (866) 399.4587 | Plug in AC adaptor here Step 5. Plug in hand controller and AC adaptor. Plug hand controller into either one of the two HBX ports on the mount. Next plug in AC adaptor. (Or use batteries—see step 3). Turn on power (the red light should go on). At this point you can begin observing manually. Use the 4 Arrow keys (^Ў<>) on the hand controller to rotate the scope Up, Down, Left, and Right. Use the SPEED key to change the slew rate from the slowest (1X) to the fastest (MAX). The next steps show you how to set up the telescope and controller for automatic slewing and tracking. Step 6. Set up telescope for auto-observing. Level the mount using the bubble on side of mount by adjusting tripod legs. The bubble should be in the middle of the circle. It is also suggested to use additional levels (such as a torpedo level) to assure precise leveling. 1) South 2) Up #4 Alt lock Step 7. Park Position for Altazimuth Operation Set telescope to PARK POSITION. (1) Position the mount so that the “SOUTH” mark is facing south (A compass may be helpful). (2) The telescope tube should be pointed directly up at the zenith. If it is not perfectly straight then loosen the altitude lock (#4) to adjust telescope. Please refer to full manual for German equatorial operation. Step 8. Main Screen Turn on the mount and wait for controller to display “GPS-OK” in top right corner —not “GPS-ON”. GPS provides Latitude, Longitude, and current time only. Step 9. Press the MENU key once. Scroll (with the ^/Ў keys) to “Set Up Controller” Press ENTER. Then go to Set Up Local Time and Site in the next screen. Select and then press ENTER. Step 10. Set Up Local Time Go to: Set up Local Time (or “Local Time and Site”). Press ENTER. Enter date and day-light savings (Y-yes. N-no). (Note: use arrow keys to scroll through screen and select numbers) iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569.0200 | Toll Free (866) 399.4587 | Step 11. Set Up Site GPS will provide the longitude and latitude information. If GPS signal is not available, these values can be manually entered here. Use ^/Ў keys to change the numbers and letters. Use keys to scroll through the fields. The last line of this screen is for setting time zone information (add or subtract 60 minutes (Min.) per time zone). Examples: minutes “behind” UT or “ahead of” UT New York: 300 Min. “behind” UT Los Angeles: 480 Min. “behind” UT Rome: 60 Min. “ahead of” UT Sydney: 600 Min. “ahead of” UT Press ENTER when finished. The mount is now ready to find (GOTO) and track objects. Step 12. Select and Slew to an object Press Menu button. Scroll to “Select and Slew” Press ENTER. Step 13. Select a category (ex. “Planets, Sun, Moon”) by scrolling with the arrow keys. Press ENTER. Then select an object (ex. “Moon”) by scrolling with the arrow keys. Pr...

Descargar ahora

Introduzca dos números de la imagen: