Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
moisture. illustration purposes. Should the fuse in the plug supplied • Connect the AC power cord securely. quality. • Make sure the safety tab of the need to be replaced, same rating cassette is in place. • Make sure the batteries are inserted • Replace all the batteries with new CD Radio To avoid electrical shock, approved by ASTA or BSI to BS 1362, correctly. ones if they are weak. (i.e. marked with or mark) ones if they are weak. quality is poor. • Replace all the batteries with new • Move the player away from the TV. The audio is weak/The audio do not open the cabinet. Cassette- must be used. Refer servicing to There is no audio. The picture of your TV becomes • Clean the heads, pinch roller and qualified personnel only. • Make sure the FUNCTION selector is unstable. capstan with a cotton swab slightly If the plug supplied with this Corder set to the function you want to moistened with cleaning fluid or • If you are listening to an FM program equipment has a detachable fuse operate. alcohol. near the TV with an indoor antenna, cover, be sure to attach the fuse Information • Adjust the volume. • Demagnetize the heads and all metal move the player away from the TV. cover after you change the fuse. • Unplug the headphones when parts in the tape path with a For customers in Europe Operating Instructions Never use the plug without the fuse commercially available tape head listening through speakers. cover. If you should lose the fuse Tape player demagnetizer. Bedienungsanleitung cover, please contact your nearest CD Player The tape does not move when Sony service station. The sound is distorted. you press an operation button. (Siehe Ruckseite.) The CD does not play/ “– –” lights • The TYPE II (high position) or TYPE • Close the cassette compartment in the display even when a CD is IV (metal) tape is being used. Use securely. TYPE I (normal) tape only. in place. • Make sure that the CD compartment The r button does not function/ is closed. The tape does not play. • Place the CD with the label surface Pinch roller Record/playback head Lens CapstanErase head This Compact Disc player is • Make sure the safety tab on theup. cassette is in place. classified as a CLASS 1 LASER • Clean the CD. • Make sure the FUNCTION selector is product. • Take out the CD and leave the CD set to CD, AM or FM. compartment open for about an hour The CLASS 1 LASER PRODUCT to dry moisture condensation. label is located on the bottom The tape does not erase • Make sure the FUNCTION selector is exterior. completely. set to CD. CFD-V10 • Clean the erasing heads. The sound drops out. • Replace all the batteries with new ones if they are weak. CFD-910 Warning Precautions • Reduce the volume. Do not install the appliance in a is badly damaged • Clean the CD, or replace it if the CD confined space, such as a bookcase On safety • Since a strong magnet is used for the • Place the player in a location free ©1996 by Sony Corporation or built-in cabinet. • As the laser beam used in the CD speakers, keep personal credit cards from vibration. Printed in China using magnetic coding or spring- player section is harmful to the eyes, wound watches away from the player • Cleans the lens with a commercially do not attempt to disassemble the The FUNCTION selector is located to prevent possible damage from the available blower. 3-859-115- 31(2) casing. Refer servicing to qualified at the front. magnet. personnel only. When you turn on the player, the • Should any solid object or liquid fall OPR/BATT indicator lights up. into the player, unplug the player, On operation and have it checked by qualified personnel before operating it any • If the player is brought directly from further. a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the CD On power sources Choosing the power sources Specifications player section. Should this occur, the • For AC operation, check that the player will not operate properly. In Use the AC power source whenever you record since recording Adjusting the voltage (only CD player section IF Power consumption player’s operating voltage is identical this case, remove the CD and wait System FM: 10.7 MHz Korean model: AC 15 W with your local power supply (See about an hour for the moisture to consumes much power. for the models equipped Compact disc digital audio system AM: 455 kHz Other models: AC 20 W “Specifications”) and use the evaporate. with VOLTAGE SELECTOR at Laser diode properties Aerials Battery life supplied AC power cord; do not use • If the player has not been used for a Material: GaAlAs FM: Telescopic aerial For CD radio cassette-corder: any other type. The voltage selector is long time, set it in the playback mode the bottom) Connecting the AC power cord Wave length: 780 nm AM: Built-in ferrite bar aerial located at the bottom of the player to warm it up for a few minutes Be sure to set the VOLTAGE Insert one end of the supplied AC power cord to the AC IN socket at the ...