Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
105856 REV. D INTRODUCTION Your new multimode matrix printer offers bidirectional logic-seeking printing at 400 cps in draft mode, memo quality printing at 180 cps and up to 120 cps in near-letter-quality correspondence mode. Because of its multimode capabilities, this printer is suited for applications where multiple printers would otherwise be required. True lower case descenders and simultaneous underlining are possible. An adjustable printhead gap accommodates forms up to six parts in thickness. Fanfold forms from 3 to 15 inches may be fed through the front or bottom of the printer. The programmable features of this printer may be configured from the control panel on the front of the printer or via the communication line. The LED indicators, digital display and custom keypad make format set up quick and simple. A non-volatile memory retains the settings when power is turned off, eliminating the need to reconfigure the printer before its next use. Baud rates from 110-19.2K may be used over the RS-232 interface. A 16K character buffer and a choice of three handshaking protocols ensure optimum throughput. An 8-bit parallel interface is also provided. The Supplier has made every effort to ensure that the contents of this document are complete and correct. Because of continuing product enhancements, we frequently update the manuals in this library. Your comments are welcome and any suggestions you have can help us improve the quality and usefulness of our publications. Comments may be addressed to place of purchase. IBM and Proprinter XL are registered trademarks of International Business Machines. Epson and FX-100 are registered trademarks of Seiko Epson Corporation. DEC and LA-120 are registered trademarks of Digital Equipment Corporation. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class A Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. NOTE When connecting the printer to a host computer system, always use shielded interface cables. The use of non-shielded interface cables is a violation of the FCC emissions limits for a Class A computing device. Do not leave unterminated interface cables connected to the printer. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le present appareil numerique n’emet pas de bruits radioelectriques dépassant les limites applicables aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioelectrique édicté par le ministère des Communications du Canada. WARNING/WARNUNG/ADVERTENCIA/ATTENTION Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Umstellung oder Abänderungen diese Gerätes dürfen nur mit ausdrücklicher Einwilligung der für die Zulassung verantwortlichen Partei geschehen und Verstöße dagegen könnten zur Folge haben, daß die Betriebseriaubnis für diese Ausrüstung widerrufen wird. Los cambios o modificaciones a esta unidad no aprobados explícitamente por la parte responsable del cumplimiento podrían invalidar la autoridad del usuario para hacer funcionar el equipo. Les changements et modifications faits à cet unité et pas explicitement approuvés par la partie responsable de la conformité peuvent annuler l’autorité de l’usager á opérer l’équipement. WARNING/WARNUNG/ADVERTENCIA/ATTENTION Any altération or modification to this equipment may cause non-compliance to: Jegliche Umstellung oder Abänderung dieses Gerätes kann Zuwiderhandlung gegen: Cualquier alteración o modificación a este equipo podría causar el incumplimiento con: Le changement ou la modification quelconque à cet équipement peut causer non-conformité avec: UL safety standard 1950 IEC safety standard 950 CSA safety standard C22.2 NO. 950 FCC Title 47, Part 15 regulations for Class A Computing Devices VDE EM...
Otros modelos de este manual:Impresoras - MS1839AVCC (6.2 mb)