Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
For any other defects, however, the manufacturer shall not be responsible. The following two types of Video Print Sets can be used with this Video Color Printer. (Use only the specified Video Print Sets and Video Print Ink Cassettes bearing the “ ” logotype.) ■ When Using the Optional Video Print Set (VW-MPS50P) (50 sheets) •Do not affix any stamps or labels to the Printing Paper and do not write on the paper with a typewriter, etc. before printing. This could cause a paper jam. •Do not write on the paper before printing. •To write on the printing side of the paper after printing, use a permanent marker (felt pen with oil-based ink). •Writing on the back side of the paper is possible with felt pens with oil- or water-based ink, pencils, ball-point pens, etc. Exerting strong pressure when writing by hand may cause traces to remain on the printing side. ■ When Using the Optional Video Print Set (VW-MPSS25P) (25 sheets/set) •Do not peel the backing (marked side) off the adhesive paper before printing. This could cause a paper jam. •Before attaching the print, wipe dust and dirt from the surface (paper, glass, plastic, metal, etc.) of the object where it is to be attached. •When cutting out part of a print to use as adhesive label after printing, use a single-sheet cutter and cut with the backing still attached. 34 Error Indications When an error occurs, an Error Message appears in the center of the TV screen to inform you. In addition, the [ERROR] Lamp or the (PAPER/INK] Lamp on the front panel of the Color Video Printer flashes. Error Message Remedy Flashing Lamp SET PAPER • Insert Printing Paper correctly. [PAPER/INK] Lamp CHECK PAPER TYPE •Use specified Printing Paper. [ERROR] Lamp SET TRAY OR INK •Insert Printing Paper or Ink Cassette correctly. [ERROR] Lamp CHANGE INK • Replace it with a new Ink Cassette. [PAPER/INK] Lamp REMOVE JAMMED PAPER • Remove jammed paper. [ERROR] Lamp CHECK INK TYPE •Use a specified Ink Cassette. [ERROR] Lamp WAIT: DRYING •Wait fora moment. P. 33 “Condensation”) [ERROR] Lamp WAIT: COOLING •Wait for a moment. (-► P. 33 “Temperature Inside the Printer”) [ERROR] Lamp CHECK SIDE COVER •Correctly close the Ink Cassette Side Cover. [ERROR] Lamp MOTOR LOCK •Consult your dealer. [ERROR] Lamp Before Requesting Service In case the Color Video Printer does not operate as expected, check the items listed below and try to remedy accordingly. •If this is not possible, consult your dealer or a Panasonic service center. Symptom Cause Remedy The Printer cannot be switched on. •The Power Cable is not connected correctly. •Plug the Power Cable into a wall outlet correctly. The colors of the prints are unnatural. •The colors of the picture were not adjusted correctly. •Adjust the picture quality correctly. No picture appears on the TV screen. •The external video source unit is not connected correctly to the Printer. •Connect it correctly. •The Input Jack is not selected correctly. P. 16) •Select it correctly. The printed pictures are not clear. •The used paper is not of the specified type. •Use specified paper. •The paper is not loaded correctly. •Make sure that the paper is loaded with the glossy side facing upward. Pressing the [MEMORY] Button does not store the picture in memory. •The MENU Screen is displayed. • Press the [EXEC] Button to terminate the MENU Mode. •The Picture stored in memory is displayed on the TV screen. •Press the [MONITOR] Button to display the external picture on the screen. 35 Notes, Others Specifications Informations for your safety PowerSource: AC 120 V±10%50/60Hz Power Consumption: 110 Watts (during printing), 15 Watts (Power On), 4 Watts (Standby Mode) Printing System: Printing Speed: Picture Memory: Print Media Ink Sheet: Printing Paper: Paper Feeding System: Picture Quality: Printing Resolution: Number of copies: Functions: Print Head: Input Jack: Output Jack: Operating Temperature: Weight: Dimensions: Thermal sublimation transfer printing system Approx. 75 sec/sheet 8 bit, 1 frame Cassette system (exclusive), 3 color field successive printing (yellow, magenta, cyan) Cut sheets; 100x 148 mm (postcard size) Printing size; 84x110 mm Automatic feeding (max. 25 sheets) 256 color gradations for each color [field memory/frame memory (still)] Number of pixel: 464x672 dots Max. 10 sheets continuously Multi Prints, Strobe Prints, Zoom Prints, Divide Prints Film Thermal Print Head 5.5 dots/mm S-Video Input Jack: S Jack (Front 1, Rear 1) V (Luminance signal): 1.0 Vp-p, 75Q C (Color signal): 0.3 Vp-p, 750 Video Input Jack: RCA Jack 1.0 Vp-p, 75ft (Front) BNC Jack 1.0 Vp-p, 750 (Rear) Remote Control Jack (Rear) S-Video Output Jack: S Jack Y (Luminance signal): 1.0 Vp-p, 750 C (Color signal): 0.3 Vp-p, 750 Video Output Jack: BNC Jack 1.0 Vp-p, 750 5°C-35°C 7% lbs (3.5 kg) 121/4" (W)x37/ie" (H)x101Vi6" (D) [310 (W)x86.5 (H)x271.4 (D) mm] Weight and dimensions shown are approximate. Specifications are sub...