Votos - 3, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
7 From the Printer menu, select Properties. 8 From the Details tab, select the printer port and click OK. B USING YOUR PRINTER ON A NETWORK B.3 In Windows NT 4.0/2000/XP Setting Up the Host Computer 1 Start Windows. 2 For Windows NT 4.0/2000, select Settings, and Printers from the Start menu. For Windows XP, select Printers and Faxes from the Start menu. 3 Double-click your printer icon. 4 From the Printer menu, select Sharing. 5 For Windows NT 4.0, check the Shared box. For Windows 2000, check the Shared As box. For Windows XP, check the Share this printer box. 6 For Windows NT 4.0, fill in the Shared Name field and click OK. For Windows 2000/XP, fill in the Shared Name field and click OK. B.4 USING YOUR PRINTER ON A NETWORK Setting Up the Client Computer 1 Right-click the Windows Start button and select Explorer. 2 Open your network folder in the left column. 3 Click the shared name. 4 For Windows NT 4.0/2000, select Settings and Printers from the Start menu. For Windows XP, select Printers and Faxes from the Start menu. 5 Double-click your printer icon. 6 From the Printer menu, select Properties. 7 From the Ports tab, click Add Port. 8 Select Local port and click New Port. 9 Fill in the Enter a port name field, enter the shared name. 10Click OK and click Close. 11For Windows NT 4.0, click OK. For Windows 2000/XP, click Apply and click OK. B USING YOUR PRINTER ON A NETWORK B.5 Setting Up a Network-Connected Printer You have to set up the network protocols on the printer to use it as your network printer. Setting protocols can be accomplished by using the supplied network program. Please refer to SyncThru User’s Guide. You can configure the basic network parameters through the printer’s control panel. Use the printer control panel to do the following: • Enable or disable network protocols (IPX/SPX) • Configure TCP/IP • Configure IPX frame types Configuring Network Parameters on the Control Panel Supported Operating Systems NOTE: The operating systems supported by the network card may be different the operating systems supported by the printer. The following table shows the network enviroment supported by the printer. Item Network Interface Requirements 10/100 Base-TX (standard for CLP-500N) or 802.11b Wireless LAN Network Operating System • Novell NetWare 4.x, 5.x, 6.x • Windows 95/98/Me/NT 4.0/2000/XP • Various Linux OS Network Protocols • Netware IPX/SPX • TCP/IP, DLC/LLC on Windows Dynamic Addressing Server DHCP, BOOTP • IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange • TCP/IP: Transmission Control Protocol/Internet Protocol • DLC/LLC: Data Link Control/Logical Link Control • DHCP: Dynamic Host Configuration Protocol • BOOTP: Bootstrap Protocol B.6 USING YOUR PRINTER ON A NETWORK Printing a Network Configuration Page The Network Configuration page shows how the network interface card on your printer is configured. The default settings which are suitable for most applications are enabled. 1 In ready mode press the Menu button ( ) until you see ‘Network’ on the bottom line of the display. 2 Press the Enter button ( ) to access the menu. 3 Press the scroll button ( or ) until ‘Print Net CFG’ displays on the bottom line. 4 Press the Enter button ( ). The Network Configuration page prints out. Setting Network Protocols When you first install the printer, all supported network protocols are enabled when you turn the printer on. If a network protocol is enabled, the printer may actively transmit on the network even when the protocol is not in use. This may increase network traffic slightly. To eliminate unnecessary traffic, you can disable unused protocols. 1 In ready mode press the Menu button ( ) until you see ‘Network’ on the bottom line of the display. 2 Press the Enter button ( ) to access the menu. 3 Press the scroll button ( or ) until ‘Config Network’ displays on the bottom line. Press the Enter button ( ). 4 Press the scroll button ( or ) to display ‘Yes’ and press the Enter button ( ). Then press the Upper Level button ( ). 5 Press the scroll button ( or ) until you see the desired protocol on the bottom line. You can choose ‘Netware’. 6 Press the Enter button ( ). 7 Press the scroll button ( or ) to change the setting to ‘On’ (enable) or ‘Off’ (disable). 8 Press the Enter button ( ) to save the selection. 9 Press the On Line/Continue button ( ) to return to ready mode. B USING YOUR PRINTER ON A NETWORK B.7 Configuring TCP/IP Your printer can be set up on a variety of TCP/IP networks. There are several ways in which your printer can be assigned a TCP/IP address, depending on your network. • Static Addressing: TCP/IP address is assigned manually by the system administrator. • Dynamic Addressing BOOTP/DHCP(default): TCP/IP address is assigned automatically by the server. Static Addressing To enter the TCP/IP address from your printer’s control panel, take the following steps: 1 In ready mode press the Menu button ( ) until you see ‘Network’ on the bottom line of the display. Press the Enter...
Otros modelos de este manual:Impresoras - CLP-500 (9.71 mb)
Impresoras - CLP-500A (9.71 mb)
Impresoras - CLP-500G (9.71 mb)
Impresoras - CLP-500N (9.71 mb)