Votos - 4, Puntuación media: 3.8
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Check the other fax machine you are sending to, to see if it can receive your fax. The incoming fax has blank spaces or is received with a poor-quality. • The fax machine sending you the fax may be faulty. • A noisy phone line can cause line errors. • Check your machine by making a copy. • The toner cartridge may be empty. Replace the toner cartridge, referring to page 5.7. Some of the words on a incoming fax are stretched. The fax machine sending you the fax had a temporary document jam. There are lines on the documents you send. Check your scan unit for marks and clean it. See page 5.4. The machine dials a number, but a connection with another fax machine fails. The other fax machine may be turned off, out of paper, or cannot answer incoming calls. Speak with the other machine operator and ask her/him to clear out the problem. Documents are not stored in the memory. There may not be enough memory to store the document. If the display shows a “Memory Full” message, delete any documents you no longer need from the memory and then restore the document. Blank areas appear at the bottom of each page or on other pages, with a small strip of text at the top. You may have chosen the wrong paper settings in the user option setting. See page 1.16. 6.10 TROUBLESHOOTING A SPECIFICATIONS This chapter includes: • A SPECIFICATIONS This chapter includes: • General Specifications • Copier Specifications • Facsimile Specifications • Paper Specifications General Specifications Item Description Automatic document feeder (ADF) Up to 20 sheets (weight: 75 g/m2, 20 lb) ADF Document size Width: 142 to 216 mm (5.6 to 8.5 inches) Length: 148 to 356 mm (5.8 to 14 inches) Paper input capacity 250 sheets (weight: 75 g/m2, 20 lb) Paper output capacity Front output tray: 150 sheets (face down) Rear output slot: 1 sheet (face up) Consumables 1-piece toner cartridge system Power requirements 100 ~ 127 VAC, 50/60 Hz, 4.0A 220 ~ 240 VAC, 50/60 Hz, 2.5A Power consumption Sleep mode: 10 W(100 ~ 127 VAC) / 12 W(220~240 VAC) Standby mode: 85 W(100 ~ 127 VAC) / 95 W(220 ~ 240 VAC) Average: 300 W Noise Level* Warm-up: 52 dB Standby mode: 39 dB Scanning: 52 dB Printing: 52 dB Warm-up Time 35 seconds Operating conditions Temperature: 50 oF to 89 oF (10 oC to 32 oC) Humidity: 20 % to 80 % RH LCD 16 characters x 2 lines Toner cartridge life** 3,000 pages (for starter, 1,000 pages) SET dimension (W x D x H) 363 x 398.5 x 308.3 mm (without the handset) Weight Net: 9.7 Kg (including consumables) Gross: 11.7 Kg (including consumables, accessories and package) Package Weight Paper: 2.7 Kg Plastic: 0.7 Kg *Sound Pressure Level, ISO 7779 **Declared yield value in accordance with ISO/IEC 19752 A.2 SPECIFICATIONS Copier Specifications Item Description Compatibility TWAIN standard Scan method CIS, Mono Scan resolution 200 X 200 dpi (Optical) Scan length Maximum: 15.7 inches (400 mm) Scan width Maximum: 8.5 inches (216 mm) Effective: 8.2 inches (208 mm) Mono bit depth 1 bit for Text mode 8 bit for Gray mode Copy speed (SDMC)* Up to 16 cpm in A4 (17 cpm in Letter) Copy speed (MDSC)** Up to 7 cpm in A4 (8 cpm in Letter) Paper type Paper tray: Plain paper (60 ~ 90 g/m2, 16 ~ 24 lb) Manual feeder: Plain paper, Transparencies, Labels Copy resolution 300 x 300 dpi Zoom rate 50 ~ 150% Multiple copies 99 pages Halftone 256 levels *Copy Speed is based on Single Document Multiple Copy **Copy Speed is based on Multiple Document Single Copy A.3 A SPECIFICATIONS Facsimile Specifications Item Description Compatibility ITU-T Group 3 Applicable line Public Switched Telephone Network (PSTN) or behind PABX Data coding MH/MR/MMR (ECM Mode) Modem speed 33600/31200/28800/26400/24000/21600/19200/16800/ 14400/12000/9600/7200/4800/2400 bps with fall back Transmission speed Approx. 3 seconds/page * Transmission time applies to memory transmission of text data with ECM compression using only ITU-T No.1 Chart. Scan speed Approx. 6 seconds/LTR (at standard fax resolution mode) Paper size Letter, A4, Legal, Executive, Folio , B5 Resolution Standard: 203 x 98 dpi Fine: 203 x 196 dpi Super Fine: 203 x 392 dpi Photo: 203 x 196 dpi User Memory 2 MB Halftone 256 levels Auto dialer One-touch dialing (up to 20 numbers) Speed dialing (up to 80 numbers) A.4 SPECIFICATIONS Paper Specifications Overview Your machine accepts a variety of print materials, such as cut-sheet paper, including up to 100% recycled fiber content paper, envelopes, labels, transparencies and custom-size paper. Properties, such as weight, composition, grain and moisture content, are important factors affecting the machine’s performance and the output quality. Paper that does not meet the guidelines outlined in this user’s guide can cause the following problems: • Poor print quality • Increased paper jams • Premature wear on the machine. NOTES: • Some paper may meet all of the guidelines in this guide and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity...
Otros modelos de este manual:Impresoras - CF-560G (4.34 mb)
Impresoras - CF-560RG (4.34 mb)
Impresoras - SCX-5315F (4.34 mb)
Impresoras - SF-560P (4.34 mb)