Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
3. Press OK when Change Default appears. 4. Press the left/right arrow until the setup option you want appears and press OK. 5. Press the left/right arrow until the setting you want appears and press OK. 6. Repeat steps 4 through 5, as needed. 7. Press Stop/Clear to return to ready mode. While you are setting copy options, pressing Stop/Clear cancels the changed settings and restores the defaults. ID CARD COPYING Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal , Folio-, Oficio-, Executive-, B5-, A5-, or A6-sized paper. When you copy using this feature, the machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item, such as a name card. This copy feature is available only when you place originals on the scanner glass. Unload the paper in ADF. 1. Press ID Copy. 2. Place the front side of an original facing down on the scanner glass where arrows indicate as shown, and close the scanner lid. 3. Place Front Side and Press[Start] appears on the display. 4. Press Start. Your machine begins scanning the front side and shows Place Back Side and Press[Start] 5. Turn the original over and place it on the scanner glass, where arrows indicate as shown. Then, close the scanner lid. If you press Stop/Clear or if no buttons are pressed for approximately 30 seconds, the machine cancels the copy job and returns to ready mode. 6. Press Start to begin copying. If the original is larger than the printable area, some portions may not be printed. If you press Stop/Clear or if no buttons are pressed for approximately 30 seconds, the machine cancels the copy job and returns to ready mode. USING SPECIAL COPY FEATURES You can use the following copy features: Collation You can set the machine to sort the copy job. For example, if you make 2 copies of a 3 page original, one complete 3 page document will print followed by a second complete document. 1. Press Copy. 2. Load originals face up into the ADF, or place a single original face down on the scanner glass. For details about loading an original, see page 30. 3. Enter the number of copies using the number keypad. 4. Press Menu until Copy Setup appears on the bottom line of the display and press OK. 5. Press OK when Change Default appears. 123 6. Press the left/right arrow until Copy Collation appears and press OK. 7. Press the left/right arrow to select On. 8. Press Start to begin copying. One complete document will print followed by the second complete document. 38 _Copying 2-up or 4-up copying Your machine can print 2 or 4 original images reduced to fit onto one sheet of paper. 1. Press Copy. 2. Load originals face up into the ADF, or place a single original face down on the scanner glass. For details about loading an original, see page 30. 3. Press Menu until Copy Feature appears on the bottom line of the display and press OK. 4. Press the left/right arrow until Layout appears and press OK. 5. Press the left/right arrow until 2-Up or 4-Up appears and press OK. 121234 6. Press Start to begin copying. You cannot adjust the copy size using the Reduce/Enlarge button for making a 2- or 4-up copy. Poster copying Your machine can print an image onto 9 sheets of paper (3x3). You can paste the printed pages together to make one poster-sized document. This copy feature is available only when you place originals on the scanner glass. Unload the paper in ADF. 1. Press Copy. 2. Place a single original face down on the scanner glass. For details about loading an original, see page 30. 3. Press Menu until Copy Feature appears on the bottom line of the display and press OK. 4. Press the left/right arrow until Layout appears and press OK. 5. Press the left/right arrow until Poster Copy appears and press OK. 6. Press Start to begin copying. Your original is divided into 9 portions. Each portion is scanned and printed one by one in the following order: Clone copying Your machine can print multiple image copies from the original document on a single page. The number of images is automatically determined by the original image and paper size. This copy feature is available only when you place originals on the scanner glass. Unload the paper in ADF. 1. Press Copy. 2. Place a single original face down on the scanner glass. For details about loading an original, see page 30. 3. Press Menu until Copy Feature appears on the bottom line of the display and press OK. 4. Press the left/right arrow until Layout appears and press OK. 5. Press the left/right arrow until Clone Copy appears and press OK. 6. Press Start to begin copying. You cannot adjust the copy size using the Reduce/Enlarge button while making a clone copy. Adjusting background images You can set the machine to print an image without its background. This copy feature removes the background color and can be helpful when copying an original containing color in the background, ...
Otros modelos de este manual:Impresoras - SCX-4824FHNK (4.73 mb)
Impresoras - SCX-4824FN (4.73 mb)
Impresoras - SCX-4824FNK (4.73 mb)
Impresoras - SCX-4824FNKG (4.73 mb)