Votos - 3, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Samsung ML-2165 |
Resumen del manual
This uses a shared secret key (generally called Pre Shared Key pass phrase), which is manually configured on the access point and each of its clients. • Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES, TKIP AES). • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. security settings. The wireless network security window appears. The window may differ according to its security mode: WEP or WPA. • WEP Select Open System or Shared Key for authentication and enter the WEP security key. Click Next. WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. • WPA Enter the WPA shared key and click Next. WPA authorizes and identifies users based on a secret key that changes automatically at regular intervals. WPA also uses TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard) for data encryption. 2. Using a network-connected machine 113 Wireless network setup Wireless network setup The window shows the wireless network settings and checks if the When the window that tells you that the network cable connection is 9 10 settings are correct. Click Next. confirmed appears, disconnect the network cable and click Next. •For the DHCP method If the network cable is connected, it may have trouble finding the machine when configuring the wireless network. If the IP address assignment method is DHCP, check if DHCP is shown in the window. If it shows Static, click Change TCP/IP to change the Wireless network setting is completed. To print from a Wi-Fi Direct assignment method to DHCP. 11 supported mobile device, set the Wi-Fi Direct Option (see "Setting up Wi •For the Static method Fi Direct" on page 131). If the IP address assignment method is Static, check if Static is shown in the window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer is set to DHCP, you must contact the network administrator to get the static IP address. For example, If the computer’s network information is as shown below, -IP address: 169.254.133.42 -Subnet Mask: 255.255.0.0 Then, the machine’s network information should be as follows: -IP address: 169.254.133.43 • Wi-Fi Direct option appears on the screen only if your printer supports -Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) this feature. -Gateway: 169.254.133.1 • Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see "Setting up Wi-Fi Direct" on page 131). Wi-Fi Direct Option: 2. Using a network-connected machine 114 Wireless network setup • Network Name(SSID): The default Network Name is the model name and the maximum length is 22 characters (not including "Direct-xx-"). • Network Key is the numeric string, and the size is 8 ~ 64 characters. When the wireless network set up is completed, disconnect the USB 12 cable between the computer and machine. Click Next. Click Next when the Confirm Printer Connection window appears. 13 Select the components to be installed. Click Next. 14 After selecting the components, you can also change the machine name, 15 set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. After installation is finished, a window asking you to print a test page 16 appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 18. If the test page prints out correctly, click Yes. 17 If not, click No to reprint it. If you want to register your machine with the Samusng web site and 18 receive useful information, click On-line Registration. If not, click Finish. Access point via WPS button (without a USB cable connection) For models that have a WPS button, you can set the wireless network using the WPS button (without a USB connection) and access point (or a router) WPS button. Items to prepare • Access point (or wireless router) • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface Creating the infrastructure network Turn on your computer, access point, and machine. 1 Insert the supplied software CD into your CD-ROM drive. 2 Select the Wireless Setting and Installation option. 3 Read the License Agreement, and select I accept the terms of the 4 License Agreement. Then, click Next. 2. Using a network-connected machine 115 Wireless network setup Select Using the WPS button and click Next. • For models that support WPS button, the above window appears. • If your machine is connected wi...
Otros modelos de este manual:Impresoras - ML-2160 (5.92 mb)
Impresoras - ML-2160/STS (5.92 mb)
Impresoras - ML-2160/XAX (5.92 mb)
Impresoras - ML-2160/XAZ (5.92 mb)