Votos - 2, Puntuación media: 4.5 ( )

Fabricar: Samsung Tamaño del archivo: 3.98 mb Nombre del archivo: Idioma del manual:

Otros manuales para este modelo:

Impresoras - ML-2852NDKG (47.58 kb)

Impresoras - ML-2852NDKG (662.67 kb)

Impresoras - ML-2852NDKG (4.56 mb)

Impresoras - ML-2852NDKG (722.79 kb)

Mostrar todo

Impresoras - ML-2852NDKG (4.96 mb)

Impresoras - ML-2852NDKG (710.81 kb)

Impresoras - ML-2852NDKG (4.56 mb)

Impresoras - ML-2852NDKG (834.04 kb)

Keep the rear cover opened during printing. 4.6 Printing with a prescribed paper size Knowing an output location Region Country mm N.A. US 101 x 152(4" x 6") EU UK 178 x 210 Italy 152 x 197 Austria 99 x 210 Netherlands 148 x 105 Swiss - Hungary 100 x 203 Poland Min. 90 x 110 Max. 200 x 215 Slovakia 104 x 148 Czech 107 x 147 Slovenia Prescription (Recept) 98 x 220 Doctors' note(napotnica) 154 x 210 CIS Russia 105 x 148.5 125 x 176 S.E. Asia Singapore 141 x 218 Philippines 182 x 257 1 1 output tray The output tray collects paper face down, in the order in which the sheets were printed. Note • If you continuously print many pages, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away from the surface. • The output tray can hold up to 150 sheets of 75 g/m2 (20 lb) plain paper. Remove the pages so that the tray is not overloaded. Caution • Do not use print media that does not meet the media specifications in the user’s guide, it can damage the machine. When using the media that meets the specification, set the paper to the right tray in the printer property. 4.7 5 Network setup(ML-2851ND only) This chapter gives you basic information for setting up your printer for network connections. This chapter includes: • Introduction • Supported operating systems • Using SetIP program Introduction Once you have connected your printer to a network with an RJ-45 Ethernet cable, you can share the printer with other network users. You need to set up the network protocols on the printer to use it as your network printer. Protocols can be set up by the following programs: • SyncThru™ Web Admin Service: A web-based printer management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network printers from any site with corporate intranet access. You can download this program from • SyncThru™ Web Service: A web server embedded to your network print server, which allows you to configure the network parameters necessary for the printer to connect to various network environments. • SetIP: A utility program allowing you to select a network interface and manually configure the addresses for use with the TCP/IP protocol. This program is on the software CD that comes with your printer. Supported operating systems The following table shows the network environments supported by the printer: Item Requirements Network interface • 10/100 Base-TX Network operating system • Windows 2000/XP/2003/2008/Vista/7/ Server 2008 R2 • Varios Linux OS including Red Hat 8 ~ 9, Fedora Core 1 ~ 4, Mandrake 9.2 ~ 10.1, SuSE 8.2 ~ 9.2 • Mac OS 8.6 ~ 9.2, 10.1 ~ 10.6 Network protocols • TCP/IP • EtherTalk •HTTP 1.1 •SNMP Dynamic addressing server • DHCP, BOOTP Item Requirements • TCP/IP: Transmission Control Protocol/Internet Protocol • DHCP: Dynamic Host Configuration Protocol • BOOTP: Bootstrap Protocol Using SetIP program This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time. Note If you want to setup DHCP network protocol, go to the developer.apple.com/networking/bonjour/download/, select the program Bonjour for Windows due to your computer operating system, and install the program. This program will allow you to fix the network parameter automatically. Follow the instruction in the installation window. This program does not support Linux. 1 Insert the driver CD provided along with your machine. 2 Start Windows Explorer and open the X drive. (X represents your CD-ROM drive.) 3 Double click Application > SetIP 4 Open the language folder you want to use. 5 Double click Setup.exe to install this program. 6 From the Windows Start menu, select Programs > Samsung Network Printer Utilities > SetIP. 7 Select the name of your printer and click “ ”. Note If you cannot find your printer name click “ ” to refresh the list. 8 Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply. Note If you do not know the network card’s MAC address, print the machine’s network information report. 9 Click OK to confirm the settings. 10 Click Exit to close the SetIP program. 5.1 6 Basic printing This chapter explains common printing tasks. This chapter includes: • Printing a document • Canceling a print job Printing a document This printer allows you to print from various Windows, Macintosh, or Linux applications. The exact steps for printing a document may vary depending on the application you use. For details about printing, see the Software Section. Canceling a print job If the print job is waiting in a print queue or print spooler, such as the printer group...

Descargar ahora

Introduzca dos números de la imagen: