Votos - 3, Puntuación media: 3.7
(
)
)
|
Fotos y especificaciones Samsung ML-2950NDR |
Resumen del manual
Click Next. Wireless network setup 14 14 After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 16. 15 15 If the test page prints out correctly, click Yes. If not, click No to reprint it. 16 16 To register as a user of the machine in order to receive information from Samsung, click On-line Registration. 17 17 Click Finish. Ad hoc via USB cable If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below. > Items to prepare • Network-connected computer • Software CD that was provided with your machine • The machine installed with a wireless network interface •USB cable 2. Using a network-connected machine > Creating the ad hoc network in Windows 1 1 Check whether the USB cable is connected to the machine. 2 2 Turn on your computer and the wireless network machine. 3 3 Insert the supplied software CD into your CD-ROM drive. Wireless network setup 422. Using a network-connected machine 4 Select the Wireless Setting and Installation option. 422. Using a network-connected machine 4 Select the Wireless Setting and Installation option. • Install Now: If you have set the wireless network, click this button to install the machine’s driver to use the wireless network machine. If you have not set the wireless network, click Wireless Setting and Installation button to set the wireless network before you click this button. • Wireless Setting and Installation: Configure the wireless network settings of your machine’s with a USB cable then install the machine driver. This only for users who have not set up the wireless connection before. 5 5 Read the License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 6 6 The software searches the wireless network. If the software has failed to search the network, check if the USB cable is connected properly between the computer and machine, and follow the instruction in the window. 7 7 After searching the wireless networks, a list of wireless networks your machine has searched appears. If you want to use the Samsung default ad hoc setting, select the last wireless network on the list, Network Name(SSID) is portthru and Signal is Printer Self Network. Then, click Next. If you want to use other ad hoc settings, select another wireless network from the list. If you want to change ad hoc settings click the Advanced Setting button. • Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive). • Operation Mode: Select ad hoc. • Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz). Wireless network setup 432. Using a network-connected machine • Authentication: Select an authentication type. Wireless network setup 432. Using a network-connected machine • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. • Encryption: Select the encryption (None, WEP64, WEP128). • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security setting. The wireless network security window appears. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. The window showing the wireless network setting appears. Check the settings and click Next. Wireless network setup 442. Using a network-connected machine -IP address: 169.254.133.43 442. Using a network-connected machine -IP address: 169.254.133.43 Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, che...
Otros modelos de este manual:Impresoras - ML-2950D (10.94 mb)
Impresoras - ML-2950DR (10.94 mb)
Impresoras - ML-2950ND (10.94 mb)
Impresoras - ML-2950ND/GOV (10.94 mb)