Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Safety information 121. Introduction .... 6 Installation / MovingDo not block or push objects into the ventilation opening. This could result in elevated component temperatures which can cause damage or fire. Be care when replacing paper or removing jammed paper. New paper has sharp edges and can cause painful cuts. When printing large quantities, the bottom part of the paper output area may get hot. Do not allow children to touch. Burns can occur. When removing jammed paper, do not use tweezers or sharp metal objects. It can damage the machine. Do not allow too many papers to stack up in the paper output tray. It can damage the machine. This machine's power reception device is the power cord. To switch off the power supply, remove the power cord from the electrical outlet. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Warning Do not place the machine in an area with dust, humidity, or water leaks. This could result in electric shock or fire. Caution Before moving the machine, turn the power off and disconnect all cords. Then lift the machine: • If the machine weighs under 20 kg (44.09 lbs), lift with 1 person. • If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift with 2 people. • If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or more people. The machine could fall, causing injury or machine damage. Safety information 131. Introduction ....Maintenance / CheckingDo not place the machine on an unstable surface. The machine could fall, causing injury or machine damage. The machine should be connected to the power level which is specified on the label. If you are unsure and want to check the power level you are using, contact the electrical utility company. Use only No.26 AWGa or larger, telephone line cord, if necessary. Otherwise, it can cause damage to the machine. Do not put a cover over the machine or place it in an airtight location, such as a closet. If the machine is not well-ventilated, this could result in fire. Make sure you plug the power cord into a grounded electrical outlet. Otherwise, this could result in electric shock or fire. Do not overload wall outlets and extension cords. This can diminish performance, and could result in electric shock or fire. Use the power cord supplied with your machine for safe Safety information 131. Introduction ....Maintenance / CheckingDo not place the machine on an unstable surface. The machine could fall, causing injury or machine damage. The machine should be connected to the power level which is specified on the label. If you are unsure and want to check the power level you are using, contact the electrical utility company. Use only No.26 AWGa or larger, telephone line cord, if necessary. Otherwise, it can cause damage to the machine. Do not put a cover over the machine or place it in an airtight location, such as a closet. If the machine is not well-ventilated, this could result in fire. Make sure you plug the power cord into a grounded electrical outlet. Otherwise, this could result in electric shock or fire. Do not overload wall outlets and extension cords. This can diminish performance, and could result in electric shock or fire. Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (6 feet) with a 110 V machine, then the gauge should be 16 AWG or larger. Otherwise, it can cause damage to the machine, and could result in electric shock or fire. a. AWG: American Wire Gauge Caution Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean the machine with benzene, paint thinner or alcohol; do not spray water directly into the machine. This could result in electric shock or fire. When you are working inside the machine replacing supplies or cleaning the inside, do not operate the machine. You could get injured. Safety information 141. Introduction .... 8 Supply usage Caution Keep the power cable and the contact surface of the plug clean from dust or water. Otherwise, this could result in electric shock or fire. • Do not remove any covers or guards that are fastened with screws. • Fuser units should only be repaired by a certified service technician. Repair by non-certified technicians could result in fire or electric shock. The machine should only be repaired by a Samsung service technician. Keep cleaning supplies away from children. Children could get hurt. Do not disassemble, repair or rebuild the machine by yourself. It can damage the machine. Call a certified technician when the machine needs repairing. To clean and operate the machine, strictly follow the user's guide provided with the machine. Otherwise, you could damage the machine. Safety information 141. Introduction .... 8 Supply usage Cautio...
Otros modelos de este manual:Impresoras - ML-2950D (10.94 mb)
Impresoras - ML-2950DR (10.94 mb)
Impresoras - ML-2950ND (10.94 mb)
Impresoras - ML-2950ND/GOV (10.94 mb)