Votos - 4, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
2 Press scroll button ( or ) until “Reset Network” displays on the bottom line. 3 Press the Enter button ( ) to reboot the network interface card. Configuring the Wireless Network See the instructions supplied with the wireless network interface card. You can easily configure the wireless network environments using the SetIP program in Windows. See the Network User's Guide. To configure the wireless network settings: 1 In ready mode, press the Menu button ( ) until you see “Network” on the bottom line of the display. Press the Enter button ( ) to access the menu. 2 Press the Enter button ( ) when “Config Network” displays on the bottom line. 3 Press the scroll button ( or ) until “Yes” displays on the bottom line. Press the Enter button ( ). 4 Press the Upper Level button ( ). 5 Press the scroll button ( or ) until “Config WLAN” displays on the bottom line. Press Enter. 6 Press the scroll button ( or ) until “Yes” displays on the bottom line. Press Enter button ( ). You can configure the following items: • SSID: When you select “Search List”, the wireless network card on your printer searches for wireless networks in the area and shows the results on the list. Select a network on the list. You cannot change “Operation Mode” and “Channel”. If you select “Custom”, you can configure the wireless settings according to your needs and enter a name of up to 32 letters for your “Custom” setting. “SSID” is case sensitive, so you need to change it carefully. Using the scroll buttons, find the alphabet you want and press the Enter button ( ). When the cursor moves to the next input field, enter the following letters the same way you entered the first letter. After you entered the last letter of the name, press the Enter button ( ) once again to save the ID. The way to enter the key number for the encryption key is the same as to enter letters. • Operation Mode: “Ad-Hoc” mode allows the wireless devices to communicate directly with each other. This is the default operating mode for the print server. If your network uses an Access Point, you must reconfigure the operation mode to “Infra”. “Infra” mode allows both wireless and cabled computers to send files to the printer through an Access Point. If you select “Auto”, the print server selects the operation mode automatically according to the network cable’s connection each time it boots up. If the network cable is detected, the print server enters “Ad-Hoc” mode; if not, enters “Infra” mode. • Channel: This option is available in the “Ad-Hoc” mode only. In most cases, you will not need to change this setting. The print server will scan all available channels for the specified network and will adapt its channel to the one detected. Default setting is 10. • Authentication: “Open System” or “Shared Key”. The Samsung print server is not configured for network authentication (Open System). If required by your network, the proper authentication method must be configured on the print server. • Encryption: “None”, “64-bit WEP”, or “128-bit WEP”. Default setting is “None”. If your network uses WEP encryption keys, you must configure the encryption keys. You can configure up to four keys. The active key must match the value and active key position (for example, Key 1) configured on other wireless devices. • Using Key: Select the key to use in your network. • Key Type: Select the key type of your network. • Key1, Key2, Key3, Key4: Enter the key number for “Encryption”. The number you can enter are as follows: Hexadecimal Alphanumeric 64-bit WEP 10 digits 5 characters 128-bit WEP 26 digits 13 characters 8.4 Using Your Printer on a Network 9 Installing Printer Options Your printer is a full-featured laser printer that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several options available to enhance the printer’s capabilities. This chapter includes: • Precaution When Installing Printer Options • Installing Memory DIMM • Installing a Network Card • Using the Hard Disk • Installing an Optional Tray 2 • Installing a Duplex Unit Precaution When Installing Printer Options DISCONNECT THE POWER CORD: Never remove the printer control board while the printer is plugged in. To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external printer option. DISCHARGE STATIC ELECTRICITY: The control board and internal printer options (Memory DIMM, Network Card and Hard Disk) are sensitive to static electricity. Before installing or removing an internal option, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk round before finishing installation, discharge any static electricity once again. Installing Memory DIMM Your printer has a dual in-line memory module (DIMM) slot. Use this DIMM slot to install more memory for the printe...
Otros modelos de este manual:Impresoras - ML-3560 (5.22 mb)
Impresoras - ML-3560G (5.22 mb)
Impresoras - ML-3561N (5.22 mb)
Impresoras - ML-3561ND (5.22 mb)