Use the [Off] setting when you want to specify a particular Ethernet setting. 6 Specify on the Ethernet Driver Settings screen. . If you want to alternately send and receive: . Press [Half Duplex]. . If you want to simultaneously send and receive: . Press [Full Duplex]. 7 Specify on the Ethernet Driver Settings screen. . If you want to establish a 10Base-T network connection: . Press [10 Base-T]. . If you want to establish a 100Base-TX network connection: . Press [100 Base-TX]. 8 Confirm the settings you specified . press [OK]. The display returns to the Network Settings screen. 9 Press [Done] repeatedly until the Additional Functions screen closes. 10 Restart the machine. . Turn OFF the machine, wait at least 10 seconds, and then turn it ON. 2-10 Interface Settings NOTE For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You Start Using This Machine," in the Reference Guide. The Ethernet driver settings are complete. 2 Basic Network Settings Interface Settings 2-11 Communication Environment Setup Communication Environment Setup 2 Basic Network Settings Settings from the Control Panel To set up a configuration for communication between the machine and computers on your network, use the following procedure. NOTE After configuring TCP/IP settings, you can change the content by using the Remote UI. The procedure for specifying the settings from the control panel is as follows: IMPORTANT Settings specified from the control panel become effective after the machine is restarted, after the procedure. NOTE For instructions on how to enter characters using the touch panel display, see Chapter 2, "Basic Operations," in the Reference Guide. 1 Specify the SNMP settings. . If you want to set or browse each item of the machine with a utility that uses SNMP to obtain information: . Press (Additional Functions) . [System Settings] . [Network Settings]. . Press [Ў] or [^] until [SNMP Settings] appears . press [SNMP Settings]. 2-12 Communication Environment Setup . Press [On]. 2 . To change [Community Name] to a name other than 'public', press [Community Name] . enter the community name using the touch panel keyboard. . If you want to allow the computers on the network to access the machine and modify its settings, press [On] for . . Press [OK]. . If you do not want to set or browse each item of the machine with a utility that uses SNMP to obtain information: . Press (Additional Functions) . [System Settings] . [Network Settings]. . Press [Ў] or [^] until [SNMP Settings] appears . press [SNMP Settings]. . Press [Off]. . Press [OK]. Basic Network Settings Communication Environment Setup 2-13 2 Specify the port setting. . If you want to set or browse detailed information on the machine with a Canon printer driver or utility: . On the Network Settings screen, press [Ў] or [^] until [Enable Dedicated Port] appears . press [Enable Dedicated Port]. 2 Basic Network Settings . Press [On]. . Press [OK]. The display returns to the Network Settings screen. 2-14 Communication Environment Setup . If you do not want to set or browse detailed information on the machine with a Canon printer driver or utility: . On the Network Settings screen, press [Ў] or [^] until [Enable Dedicated Port] appears . press [Enable Dedicated Port]. . Press [Off]. . Press [OK]. The display returns to the Network Settings screen. IMPORTANT • If you want to use a Canon printer driver or utility, press [On] for both
)
