Votos - 3, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
See “Printing a Nozzle Check Pattern” on page 32. Printing Without a Computer Printing Without a Computer Using the Memory Card Utility You’ll need your computer to use the Memory Card Utility. Use this utility to change the settings when you insert a memory card or to change the read/write mode of the card slot. Normally, the Memory Card Utility starts automatically when you insert a memory card. To start it manually, follow the instructions below. If you eject a memory card while the access lamp is on or blinking, the memory card may not operate properly. Always use the Memory Card Utility to eject a memory card. Before you eject a memory card, be sure to discard the icon into the Trash. When you select Change the drive’s read/write attribute and set the Read/Write-Enabled Mode, note the following points: • Change the write protection of the memory card to write- enabled mode before inserting the memory card. If you insert a write-protected card, the computer may not operate normally. • If you change the contents of a memory card, you must format the memory card with a digital camera, otherwise you may not be able to take photographs. This printer supports only the format used by the digital camera. • If you change or manipulate the contents of a memory card from a computer, be sure to print the contents from the computer. If you print the contents from the Operation Panel, the information may not print properly. 34 Printing Without a Computer Printing Without a Computer To use the Memory Card Utility in Windows: Double-click the icon on the right side of the task bar. The Memory Card Utility will appear, allowing you to select among these options: View card contents in Explorer: Displays a list of the files stored on the memory card within Windows Explorer. Eject the Memory Card: When selected, the indicator lamp starts blinking, a message will appear, and the printer gets ready for memory card ejection. When the indicator lamp goes off, press the Eject button and remove the memory card. Change the drive’s read/write attribute: Displays the USB Memory Card Settings dialog box where you can change the mode (Read-only mode, or Read/write mode) of the card slot by following the on-screen instructions. By default, the mode is set to Read-only. Be sure to remove the memory card before changing the mode by using Eject the Memory Card. Close: Closes the Memory Card Utility. The following additional options appear on all Windows operating systems except Windows XP: Start an application: Starts an application. Depending on the application, the contents of the memory card may be displayed. Auto-start an application when a card is inserted/Do nothing when a card is inserted: Determines whether an application will start each time the memory card is inserted. You can set the application to be started in advance with the Auto-Start Properties function. Do not display this dialog when a card is inserted: When this checkbox is selected, this screen is not displayed even when a memory card is inserted. 35 Printing Without a Computer To use the Memory Card Utility in Mac OS: In the Apple menu, select BJ Utility. The BJ Utility will appear, allowing you to select among these options: Start an application: Starts an application. Depending on the application, the contents of the memory card may be displayed. Change the drive’s read/write attribute: Displays the Drive Settings dialog box where you can change the mode (Readonly mode or Read/write mode) of the card slot by following the on-screen instructions. By default, the mode is set to Read-only. Be sure to eject the memory card before you change the mode. Auto-start an application when a card is inserted/Do nothing when a card is inserted: Determines whether an application will start each time the memory card is inserted. You can set the application to be started in advance with the Auto-Start Properties function. Do not display this dialog when a card is inserted: When this checkbox is selected, this screen is not displayed even when a memory card is inserted. Quit: Closes the Memory Card Utility. 36 Printing Without a Computer Printing Without a Computer Setting the Application to be Started This section applies to all versions of the Windows operating system except Windows XP. Set the application to be started whenever a memory card is inserted or Start an application is clicked. To set the application to be started in Windows: 1. Open the Memory Card Startup Utility, and then click Auto-Start Properties. The Auto-Start Properties dialog box will appear. 2. Specify Start Settings: • Start the appropriate application [recommended]: When you select this option, the system automatically identifies the type of data stored in the memory card and starts the appropriate application. When this option is not selected, the specified application is not started even if the memory card contains that type of data. • Always start the same application: When you select this option, the...