Votos - 4, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Do not plug the F30 MFP into the same circuit with appliances such as an air conditioner, television, or copier. These devices generate electrical noise which may interfere with your F30 MFP’s ability to operate. Whenever you turn off the power and unplug the F30 MFP, wait at least five seconds before you plug it in again. Plug the F30 MFP into a standard 120V AC/60Hz, three-prong grounded outlet. Operate the F30 MFP only from the type of power source indicated on the F30 MFP’s label. If you are not sure of the type of power available, consult your local power company. Use only the power cord that came with the F30 MFP. Turn off the power and unplug the F30 MFP in the following conditions: • When the power cord or plug is damaged or frayed. • Ifliquid has spilled into the F30 MFP. • If the F30 MFP has been exposed to rain or water. • If the F30 MFP does not operate normally when you have followed the instructions in the guides included with your machine. Adjust only those controls that are covered by the instructions in the guides since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. • If the F30 MFP has been dropped or damaged. • If the F30 MFP exhibits a distinct change in performance, indicating a need for servicing. Handling Do not drop paper clips, staples, or other metal objects inside the F30 MFP. Also do not spill water, liquid or flammable substances inside the F30 MFP. If these items come into contact with high-voltage parts inside the F30 MFP, it may result in a fire or electrical shock. If these items are dropped or spilled in the F30 MFP, turn off the power and unplug the power cord immediately with dry hands. Then, contact the Canon Customer Care Center. Do not use any highly flammable spray near the F30 MFP. If gas from a spray comes into contact with the electrical components inside the F30 MFP, it will result in a fire. Close the platen glass cover or the scanning unit gently to avoid catching your hand. Failing to do so may result in personal injury. 5 550 00 • Do not press down hard on the platen glass cover when using the platen glass to scan thick books. This maydamage the platen glass and/or result in personal injury. • Do not fix your eyes on the luminous source while making copies and scanning, as this may result in personal injury. • Do not subject the F30 MFP to strong physical shock or vibration. • Turn off the power and unplug the F30 MFP before moving it. • Do not lift the F30 MFP by any of its attachments. • If the F30 MFP exhibits a distinct change in performance, this indicates a need for servicing. Maintenance Do not service the F30 MFP yourself except as specifically described in this guide. If further servicing is required, contact the Canon Customer Care Center. • Keep the F30 MFP clean. Dust accumulation may prevent the F30 MFP from operating properly. Printhead and Ink Tanks For safety, always store printhead and ink tanks out of the reach of small children. If a child accidentally licks or ingests any ink, consult a physician immediately. Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could cause ink to leak and stain clothing. Never touch the printhead or electrical contacts on a printhead immediately after removing it from the F30 MFP. These metal parts become very hot during printing and could cause minor burns. Turning the F30 MFP Off To avoid equipment malfunction always use the O OON NN/ //O OOF FFF FF button to turn the F30 MFP on and off. Never remove the power cord from the power outlet untilyou have turned off the F30 MFP by pressing the O OON NN/ //O OOF FFF FF button. Once off, you can unplug the power cord from the power outlet. Using the Printer Near Appliances and Fluorescent Lamps Allow at least 6 inches clearance between the F30 MFP and another appliance or a fluorescent lamp. Electrical noise generated by a fluorescent lamp placed too close to the F30 MFP could cause the F30 MFP to malfunction. Regulatory Information MultiPASS F30 MFP Color Printer, Model Number H12220 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio 5 551 11 Appendix F30 MFP User’s Manual F30 MFP User’s Manual frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not ...