Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
Not only can you enjoy the ice-making function, but you can also enjoy cool or hot water. With its whisper-quiet operation and attractive design, you will enjoy convenience and comfort for years to come. Please read these instructions carefully before operating. When using this appliance, always exercise basic safety precautions. This easy-to-use manual will guide you on how to ensure the best use of your unit. Please complete the following information for future reference, necessary to obtain warranty service. Model Number:_ Serial Number: ________________ Date of Purchase: __________ Place of Purchase:__ 1 iIMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electrical shock, and injury to persons or property. Read all instructions before using any appliance. • Do not operate this or any other appliance with a damaged cord. Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle. • Do not run the power cord over carpeting or other heat insulators. Do not cover the cord. Keep cord away from traffic areas and do not submerge in water. • We do not recommend the use of an extension cord, as it may overheat and become a fire hazard. If you must use an extension cord, use a minimum size of No.14 AWG, and rated no less than 1875 watts. • If the unit is brought in from outside during the winter, allow a few hours for the unit to reach room temperature before plugging in. • Do not let hot water touch bare skin. Exercise caution and use supervision when the appliance is used near children. • Do not use your unit outdoors. Place on an even or flat surface to avoid hazard due to instability of the appliance. • Do not place the unit in direct sunlight and make sure that there is at least 2 inches of space between the back of your unit and the wall. Keep a minimum distance of 4 inches on each side of your unit. • Do not tip the unit over. • Do not use other liquids besides water to make ice cubes or to dispense cold drinks. • Always turn off and unplug the unit when there is no water left in the bottle or when you are changing the bottle. Turn it back on after a new bottle has been placed inside and when the air is purged from the water taps. • Unplug the unit before cleaning or making any repairs/servicing. • Do not clean the unit with flammable fluids. The fumes can create a fire hazard or explosion. • Disconnect the main plug from the supply socket when the unit is not in use or you are traveling. The supply connection is through the main plug. WARNING: This appliance must be grounded. IMPORTANT: The wires in the main lead are colored in accordance with the following codes: Green or Green with Yellow strip: Grounding White: Neutral Black: Live 2 GETTING TO KNOW YOUR UNIT Unit Outline Smart Device for Water Bottle Operation Panel Hot later Faucet ^ foot Tern »ater Fauwi^ Cold liter Faucet Drip Water Tray Ice Bn trance Door Handle Power Cord Drain cap for | r/Jio't tank Drain cap for /Ice dispenser Compressor, condenser, and fan uotor inside. /Locate on the base board. Ice Entrance^ Poof jopep^a) Hot Water Fmtcet with Children Safty Guard Ice-«aking Box sTc9'«iri"Crater fc* Storing Plate yiCm be removed for cleaning.) Operation : Step It Turn the shaft of child fiafty guard fdaiter-clockvisely. Step 2: Push the turned shaft towards the inside• 3 Operation Panel Hot Water Indicator Cold Water Indicator Ice_Maker Indicator Main Functions • Hot water • Cold water only • Ice-making only • Cold water and ice-making at same time 4 Begin Operation UNPACKING THE UNIT • Removing the package: Do not turn the unit upside down or lay it on its side. a. Remove the strap. b. Open the carton box. c. Remove the Styrofoam packing from the box. d. Pull the unit straight up from the box. e. Remove the plastic bag. The refrigeration compressor has sensitive mounts inside of the welded shell for quiet operation. Improper handling may damage the compressor. • Wipe clean if necessary. • Place the unit evenly and gently on a hard and flat surface. The location should not be directly in the sunlight or another source of heat. • Place the unit where it will receive proper air circulation, and make sure that there is at least 2 inches between the back of the unit and the wall. Keep a minimum distance of 4 inches between each side of the unit. • The appliance must be positioned so that the plug is accessible. • Fasten the drain cap tightly on the back of the unit before running, as during the shipping process, it may be loose. If it is not fastened properly, water leakage may occur. • Do not plug the power cord into the power socket before further reading instructions! This unit is for indoor use only. Room temperature should not exceed 97 Degrees F/36 Degrees C. CLEAN BEFORE USING Be...