Votos - , Puntuación media: ( )

Manual de usuario Follett, modelo Horizon HCC1000AJS

Fabricar: Follett
Tamaño del archivo: 3.69 mb
Nombre del archivo: 2d809e7b-2e34-4c30-8929-bce4e85c098c.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

Internal connections 7 • Remove twist tie • Carefully pass plug thru opening and plug into wall outlet 7.3 Power cord . . • Slide icemaker into louvered docking assembly . • Insert ice transport tube all the way into coupling and tighten nut firmly . 7.1 Ice transport tube . . . . • Insert potable water line into valve . • Push drain line over hose barb on back of evaporator mount . 7.2 Potable water and drain lines Air-cooled icemakers – follow steps 7.1 through 7.4. • Position plate into opening and secure with supplied screw 7.4 Power cord CAUTION • Plug must be accessible after fi nal installation. • HCE1400A/W 230/50/1) requires a 20 amp circuit (4.00 mm2 wire) DROP-IN • SATELLITE-FILL self-contained 13 . . . . • Insert potable water line into valve . • Push drain line over hose barb on back of evaporator mount . 7.7 Potable water and drain lines In Out • Install icemaker cooling water lines to louvered docking assembly 7.5 Cooling lines . . • Slide icemaker into louvered docking assembly . • Insert ice transport tube into coupling and tighten nut firmly . 7.6 Ice transport tube Valve is preset at factory. Do not adjust. Adjustment will void warranty and may damage equipment. ATTENTION INSTALLER . . • Connect cooling water lines to icemaker . • Water valve is set at the factory. DO NOT remove seal or adjust water valve . 7.8 Cooling lines and power Water-cooled icemakers – follow steps 7.5 through 7.10. 14 self-contained DROP-IN • SATELLITE-FILL • Remove twist tie • Carefully pass plug thru opening and plug into wall outlet 7.9 Power cord • Position plate into opening and secure with supplied screw 7.10 Power cord Front cover Install front cover to icemaker. 8 . . • Slide icemaker cover over machine ensuring that tabs on back of cover slip under louvers on back of louvered docking assembly . • Insert and tighten two screws through cover and into louvered docking assembly . Normal front cover installation . . . CAUTION • Keep ventilation openings in the appliance enclosure clear of obstruction. • To ensure proper ventilation (if not using supplied grille) carefully review air circulation specifications in section 4.1 • Remove and discard plastic grille . • Apply supplied gasket material around entire opening on skin to prevent air recirculation . • Attach supplied metal grille to opening in counter door (see section 4.1) . Front cover installation – undercounter 8 . . • Slide icemaker cover over machine ensuring that tabs on back of cover slip under louvers on back of louvered docking assembly . • Insert and tighten two screws through cover and into louvered docking assembly . Normal front cover installation . . . CAUTION • Keep ventilation openings in the appliance enclosure clear of obstruction. • To ensure proper ventilation (if not using supplied grille) carefully review air circulation specifications in section 4.1 • Remove and discard plastic grille . • Apply supplied gasket material around entire opening on skin to prevent air recircul...