Votos - 3, Puntuación media: 4.7 ( )

Fabricar: Dynasty Spas Tamaño del archivo: 405.83 kb Nombre del archivo: Idioma del manual:

Follow action required for “” message. Heating capability of the spa will not reset automatically; you may press any button to reset. Check water level in spa. Refill if necessary. If water level is okay, make sure the pumps have been primed. Press any button to reset, or this message will automatically reset within 15 minutes. If problem persists, contact your dealer or service organization. Follow action required for “” message. Spa will not automatically reset. Press any button to reset. No message on display. Power has been cut off to the spa. Temperature unknown. “Overheat” - The spa has shut down. One of the sensors has detected 118°F/48°C at the heater. “Overheat” - The spa has shut down. One of the sensors has detected that the spa water is 110°F/43°C. “Ice” - Potential freeze condition detected. Spa is shut down. The sensor that is plugged into the Sensor “A” jack is not working. Spa is shut down. The sensor that is plugged into the Sensor “B” jack is not working. Sensors are out of balance. If alternating with spa temperature, it may just be a temporary condition. If flashing by itself, spa is shut down. A significant difference between temperature sensors has been detected. This could indicate a flow problem. Persistent low flow problems. (Displays on the fifth occurrence of “” message within 24 hours.) Heater is shut down, but other spa functions continue to run normally. Possible inadequate water, poor flow, or air bubbles in detected in the heater. Spa is shut down for 15 minutes. Inadequate water detected in heater. (Displays on third occurrence of “” message.) Spa is shut down. Warning! Shock Hazard! No User Serviceable Parts. Do not attempt service of this control system. Contact your dealer or service organization for assistance. Follow all owner’s manual power connection instructions. Installation must be performed by a licensed electrician and all grounding connections must be properly installed. P/N 40299 05/28/2004 ...

Descargar ahora

Introduzca dos números de la imagen: