Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this product! 1. Avoid working alone. If an accident happens, an assistant can bring help. 2. Keep work area clean.

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure the following parts are included. (1) Mini laser level (1) Tripod (3) 1.5V AG13 button cell batteries (1) Instruction booklet If any parts ar

We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness. To take advantage of this warranty,

Failure to do so can result in serious injury. Save this manual. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be

Failure to do so can result in serious injury. Save this manual. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be

2. Always wear ANSI approved safety goggles when working with tools and equipment. 3. Only use the Cabinet on a flat, level and solid surface that is capable of supporting the weight of the Cabinet and its contents. 4. Do not exceed the 2894 Lbs. maximum weight capacity (dead weight) - evenly distributed among the drawers. Assembly: The Cabinet includes only 1 Handle. Assemble side handle using included screws. All drawers must be pushed in fully before Cabinet will lock. Revised Manual 10e Part

Keep this product clean and dry for better and safer performance. 13. MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician. 14. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool, attachment, or accessory to do the work of a larger industrial tool, attachment, or accessory. There are certain applications for which this product was designed. It will do the job better and more safely at the rate for which it was intended. D

Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Specifications Drawer Size Weight Capacity Top Drawer Dimensions 11-7/8” x 23-1/2” x 1-7/8” 26 lb. Bottom Drawer Dimensions 11-7/8” x 23-1/2” x 3-3/4” 26 lb. Overall Dimensions 14-1/8” x 26-1/4” x 8-1/4” Includes lock and 2 keys Designed to fit between SKU 67420-3 Drawer Roller Cabinet Chest and SKU 67423-6 Drawer Top Tool Chest, (Sold Separately). Tool Chest mad

Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 19. Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the compressor without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the compressor. Check your air compressor’s manual

All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions please call 1-800-444-3353 SPECIFICATIONS ITEM DESCRIPTION Caulking Gun 23 Ga. Sheet Steel (Stamped and Formed) Finish Blue Paint w/Zinc Plating Steel Rod w/ Steel Rivets 0.288 “ Handle 4” Square Overall Size 12 1/2” Long X 2 1/8” Wide (Tube) Capacity 9” for Standard Caulking Tube Weigh