Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
However, if you are using the Color to Gray Compatibility palette mode, the color setting for your high-resolution grayscale displays should default to True Color (32 bits per pixel). Even though this palette mode supports 32 bit True Color, we recommend that when using a using a color display in conjunction with your high-resolution grayscale display(s) that you still set the color display as the primary monitor. Configuring the DualView desktop Display Resolution Under Windows 2000 and Windows XP both displays connected to a single BarcoMed controller must have the same resolution settings in order to be attached to the desktop. Nio® medical display systems BarcoMed Driver Tab Examples (your resolution settings may be different): OK to use: Display 1 2480 x 2560 @ 59 Hz Display 2 2480 x 2560 @ 59 Hz Not OK to use Display 1 2480 x 2560 @ 59 Hz Display 2 2560 x 2480 @ 59 Hz The following options maybe set individually on each Barco display even if they are connected to the same BarcoMed controller: Palette Mode Drawing Mode Note: If the second display connected to any given BarcoMed controller is not attached to the desktop when you set the Palette Mode, Drawing Mode, etc. of the attached display, the second display will inherit the properties of the first display when you attach it to the desktop. Nio® medical display systems BarcoMed Hardware Tab BarcoMed Hardware Tab Introduction The BarcoMed Hardware Tab is used for gathering information about BarcoMed display controller(s). For all BarcoMed display controller(s) it will display PCI information. For BarcoMed display controller(s) based on the AURA video chipset it will also display information about the Firmware installed on the board. Table 1: AURA Controllers Non-AURA Controllers BarcoMed Hardware Tab Support BarcoMed Nio PCI and Firmware Information BarcoMed Coronis PCI and Firmware Information BarcoMed 1MP2FH PCI and Firmware Information BarcoMed 2MP1 PCI Information Only BarcoMed 2MP1NT PCI Information Only BarcoMed 2MP2 PCI Information Only BarcoMed 2MP2H PCI and Firmware Information BarcoMed 2MP2CF–3D PC and Firmware Information BarcoMed 2MP2CP PCI and Firmware Information BarcoMed 2MP2FH PCI and Firmware Information Nio® medical display systems BarcoMed Hardware Tab Table 1: AURA Controllers Non-AURA Controllers BarcoMed Hardware Tab Support BarcoMed 3MP2FH PCI and Firmware Information BarcoMed 5MP1H PCI Information Only BarcoMed 5MP1HM PCI and Firmware Information BarcoMed 5MP2 PCI Information Only BarcoMed 5MP2 AURA PCI and Firmware Information BarcoMed Coronis 5MP PCI and Firmware Information BarcoMed 5MP2F PCI and Firmware Information BarcoMed 5MP2FH PCI and Firmware Information Using The BarcoMed Hardware Tab To access the BarcoMed Hardware Tab do the following: 1. Open the “Display Properties Control Panel” by right clicking on the desktop, then select “Properties”. Nio® medical display systems BarcoMed Hardware Tab Figure 40 BarcoMed Hardware Tab under Windows 2000 or Windows XP Device Displays the current BarcoMed display controller, driver, and the currently selected display resolution. Identify Device: This button is for Barco Medical Imaging Systems (MIS) internal use only and is grayed out. Nio® medical display systems BarcoMed Hardware Tab PCI Information Device ID: Displays the device’s PCI Device ID number. Vendor ID: Displays the device manufacturer’s PCI Vendor ID number. Subsystem ID: Displays the device’s PCI Subsystem ID number. SubsystemVendorID: Displays the device’s PCI Subsystem Vendor ID number. VGA Status: Displays whether the VGA capabilities of the BarcoMed controller are enabled or disabled. Firmware Information Product Name: Displays the name of the BarcoMed display controller installed in the selected PCI slot. Serial Number: Displays the serial number of the BarcoMed display controller installed in the selected PCI slot. VGA Bios Version: Displays the VGA Bios version for the BarcoMed display controller installed in the selected PCI slot. Firmware Version: Displays the firmware version for the BarcoMed display controller installed in the selected PCI slot. Hardware Version: Displays the Hardware Version for the BarcoMed display controller installed in the selected PCI slot. “Advanced ...” Button: By clicking on this button, the user can display more information about the BarcoMed display controller installed in the selected PCI slot. Utilities “Generate Report” Button: Clicking this button will launch the BarcoMed Self Exam utility. BarcoMed Self Exam is an automated Barco Diagnostic Tool that is used to gather the information that support engineers and technicians need to help determine the root cause of a customer Nio® medical display systems BarcoMed Hardware Tab problem. It probes the system for various types of system information, and saves it to a web-page report that can then be analyzed by the Barco ImageCare team. BarcoMed Self Exam is implemented in a Wizard Format. The BarcoMed Self Exam Wizard will fir...
Otros modelos de este manual:Otros dispositivos personales - NIO E-3620 (4.17 mb)