Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
• The group [elite Panaboard] will be created in the [Panasonic] group in the program menu. • The following items will appear in the [elite Panaboard] group: – elite Panaboard software – elite Panaboard book – Operating Instructions for Basic Operations – Operating Instructions for Software – Download the latest version Operating Instructions (For Basic Operations) Usage Usage Set up your projector as instructed below. About Positioning the Image • When you are projecting an image, make sure that the edge of the projected image is at least 5 mm (1/4 in.) from the screen frame. The electronic pen may not function correctly within 50 mm (2 in.) of the position sensor in the upper-left corner of the screen board. UB-T781 / UB-T761 Projectable Area5 mm (1/4 in.) 5 mm(1/4 in.) 50 mm (2 in.) 5 mm (1/4 in.) UB-T781W Projectable Area50 mm (2 in.) 5 mm(1/4 in.) 5 mm(1/4 in.) 5 mm (1/4 in.) Project the Image as a Rectangle • Adjust the location of the projector to project at a right angle with the elite Panaboard. 1 Operating Instructions (For Basic Operations) 23 Usage • If the image is projected trapezoidally, the position of the electronic pen may not be read correctly. Adjust the projector so that the projected image is a rectangle. Refer to your projector's documentation for information on adjusting the projected image. Set the Proper Resolution • Set your computer's and projector's resolutions to the most appropriate setting. If the resolution is not set properly, the image will be difficult to see. Particularly, if the projector's resolution is lower than the computer's, thin lines can appear cut or broken. Refer to your projector's documentation for information on adjusting the resolution. Do Not Look Directly into the Projector Lamp • When using a projector, try to avoid looking directly into the projector lamp. Doing so can hurt your eyes. Setting Your System (Calibration) About Calibration Calibration is setting up the elite Panaboard and projector so that lines and comments drawn on the screen board with the electronic pen will be correctly displayed on the image projected onto the screen board. Be sure to perform calibration before use. After you have set up the elite Panaboard, project an image onto the screen board and use the elite Panaboard software installed on your computer to perform calibration. After Calibration Do Not Move the elite Panaboard or the Projector • The position of projected image and electronic pen will become misaligned in the following cases, requiring you to re-calibrate their positions. – The location of the projector changed. – The location of the elite Panaboard changed. – The image area or placement was changed due to changes in the zoom, focus, etc. – The resolution of the projector or the computer changed. • If you are using the elite Panaboard installed on a stand, be aware that accidentally hitting the elite Panaboard or pushing too strongly with the electronic pen ...
Otros modelos de este manual:escáner / copiadora / impresora multifunción - UBT761 (1.87 mb)
Proyectores - UB-T761 (1.87 mb)
Proyectores - UB-T781W (1.87 mb)
Proyectores - UB-T781 (1.87 mb)