Votos - 4, Puntuación media: 3.5
(
)
)
|
Fotos y especificaciones Sony VPL-EX7 |
Resumen del manual
The key used for switching the computer to output to the projector varies depending on the type of computer. 6 Adjust the upper or lower position of the picture. Use the adjuster to adjust the picture position. Using the adjuster Lift the projector while pressing the adjuster adjustment button, and adjust the tilt of the projector, then release the button to lock the adjuster. Adjuster adjustment button Notes • Be careful not to let the projector down on your fingers. • Do not push hard on the top of the projector or do not drag it hard with the adjuster out. It may cause malfunction. Projecting 7 7 ) of the picture. (VPL-EX7/ ES7 only) Press the KEYSTONE key on the Remote Commander to display the adjustment menu and adjust the tilt using the v/V/b/B keys. For VPL-EX70 • When you adjust the tilt of the projector with the adjuster, the V keystone adjustment is performed at the same time. If you do not want to perform the automatic keystone adjustment, set the “V Keystone” to “Manual.” (See page 36.) • If you set the “V Keystone” to “Auto,” the “V Keystone” correction is automatically adjusted. However, it may not be perfectly adjusted depending on the room temperature or the screen angle. In this case, adjust it manually. Press the KEYSTONE key to “V Keystone” displays on the screen, and adjust the value with the v/V/b/B keys. 8 Adjust the size of the picture and the focus. Adjust the picture size using the Zoom ring and adjust the picture focus using the Focus ring. Turning Off the Power 1 Press the ?/1 key. “POWER OFF? Please press ?/1 key again.” appears to confirm that you want to turn off the power. Note The message disappears if you press any key other than the ?/1 key, or if you do not press any key for five seconds. 2 Press the ?/1 key again. The ?/1 key flashes in green and the fan continues to run to reduce the internal heat. Also, the ?/1 key flashes quickly for the first 60 seconds. During this time, you will not be able to light up the ?/1 key again with the ?/1 key. 3 Unplug the AC power cord from the wall outlet after the fan stops running and the ?/1 key lights in red. (Except when using the Direct Power On/Off function or the Off & Go function.) Turning Off the Power Convenient Functions 1 Plug the AC power cord into a wall outlet. 2 Press the ?/1 key to turn on the projector. 3 Press the MENU key. The menu appears. INPUT MENU NETWORK USB RESET AUTO FOCUS D ZOOM LENS ENTER VOLUME KEYSTONE /TILT FREEZE PIC MUTING AUDIO MUTING APA 1 2 4,5,6 4,5,6 2 3 3 Front remote control detector Convenient Functions 1 Plug the AC power cord into a wall outlet. 2 Press the ?/1 key to turn on the projector. 3 Press the MENU key. The menu appears. INPUT MENU NETWORK USB RESET AUTO FOCUS D ZOOM LENS ENTER VOLUME KEYSTONE /TILT FREEZE PIC MUTING AUDIO MUTING APA 1 2 4,5,6 4,5,6 2 3 3 Front remote control detector Selecting the Menu Language You can select one of several languages for displaying the menu and other on-screen displays. The factory setting is English. To change the menu language, proceed as follows: Selecting the Menu Language The menu currently selected is shown as a yellow button. The menu currently selected is shown as a yellow button. 4 Press the v or V key to select the MENU SETTING menu, then press the B or ENTER key. The selected menu appears. 5 Press the v or V key to select “Language,” then press the B or ENTER key. 6 Press the v, B, b or V key to select a language, then press the ENTER key. The menu changes to the selected language. To clear the menu Press the MENU key. The menu disappears automatically if a key is not pressed for one minute. The projector is equipped with a security lock function. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture. Notes • You will not be able to use the projector if you forget your password and the password administrator is not available. Be please aware that using the security lock can prevent valid usage in such cases. • When you set the security lock being active, the password will be necessary only when the power is turned on after plugging the power cord. To use the security lock 1 Press the MENU key and then, on the INSTALL SETTING menu, turn on the “Security Lock” setting. 2 Enter the password. Use the MENU, v/V/b/B, and ENTER keys to enter the four-digit password. (The default initial password setting is “ENTER, ENTER, ENTER, ENTER.” After this is entered you can put in your own password. Therefore, when you use this function for the first time, please input “ENTER” four times.) Enter password key. Password required for power-on. Use: Cancel: Other key Next, the screen for entering the new password is displayed. (Enter the password on this screen even if you want to keep the current password.) Security Lock Enter the password on this screen. 2 Enter the password. Enter the password that was set. Note If you call t...
Otros modelos de este manual:Proyectores - VPL-ES7 (3.28 mb)
Proyectores - VPL-EX70 (3.28 mb)