Votos - 2, Puntuación media: 4.5
(
)
)
|
Fotos y especificaciones Sony VPL-EX70 |
Resumen del manual
Security certification When the password screen is displayed, enter the password that was set. If you fail to enter the correct password after three times, the projector cannot be used. In this case, press the ?/1 key to turn off the power. To cancel the security lock 1 Press the MENU key, then turn off the “Security Lock” setting on the INSTALL SETTING menu. Convenient Functions Security Lock Other Functions Direct Power On/Off Function If you will be using a circuit breaker to turn the power for the entire system on and off, set the direct power on function to “On.” You can turn the power on/off without pressing the power key on the projector. Off & Go Function If you are leaving the conference room immediately, turn the projector off, and then, you can unplug the AC power cord. Note When you restart the power immediately after turning it off using the Off & Go function, the power may not come back on. In that case, wait a few minutes and turn on the power again. Effective Tools for Your Presentation To enlarge the image (Digital Zoom function) You can select a section of the image to enlarge. This function works when a signal from a computer is input. This function does not work when a video signal is input. 1 Project a normal image, and press the D ZOOM + key on the Remote Commander. The digital zoom icon appears in the center of the image. Digital zoom icon 2 Move the icon to the point on the image you want to enlarge. Use the arrow key (v/V/b/B) to move the icon. 3 Press the D ZOOM + key again. The portion of the image where the icon is located is enlarged. The enlargement ratio is displayed on the screen for a few seconds. By pressing the + key repeatedly, the image size (ratio of enlargement: max. 4 times) increases. Use the arrow key (v/V/b/B) to scroll the enlarged image. To return the image to its original size Press the D ZOOM – key. Just pressing the RESET key returns the image back to its original size immediately. To freeze the image projected (Freeze function) Press the FREEZE key. “Freeze” appears when the key is pressed. This function works when a signal from a computer is input. To restore the original screen, press the FREEZE key again. Other Functions B Adjustments and Settings Using a Menu B Adjustments and Settings Using a Menu U The projector is equipped with an on-screen menu for making various adjustments and settings. Display items Input signal indicator Input signal setting indicator Picture adjustment menu Input signal indicator Shows the selected input channel.x is displayed when no signal is input. You can hide this indicator using “Status” on the MENU SETTING menu. Input signal setting indicator For Input-A: Shows “Auto” or “Input-A Signal Sel.” setting on the SET SETTING menu. For Video/S-Video input: Shows “Auto” or the “Color System” setting on the SET SETTING menu. 1 Press the MENU key. The menu appears. The menu presently selected is shown as a yellow button in the column on the left. Smart APA: On Auto Input Search: Off Input-A Signal Sel.: Component Color System: Auto Power Saving: Off Panel Key Lock: Off CC Display: Off Lamp Timer Reset SET SETTING Input-A 2 Use the v or V key to select a menu, then press the B or ENTER key. The selected menu appears. 3 Select an item. Use the v or V key to select the item, then press the B or ENTER key. The setting items are displayed in a popup menu or in a sub menu. Pop-up menu Setting Selected input Menu items signal English A MENU SETTING Input A OnStatus: Language: Menu Position: Start Up Image Top left Bottom Left Center Top Right Bottom Right Sub menu Menu Setting items 4 Make the setting or adjustment of an item. • When changing the adjustment level: To increase the number, press the v or B key. To decrease the number, press the V or b key. Press the ENTER key to restore the previous screen. • When changing the setting: Press the v or V key to change the setting. Press the ENTER or b key to restore the previous screen. Adjustments and Settings Using a Menu PICTURE SETTING Contrast: 80 Brightness: 50 Gamma Mode: Graphics Color Temp.: High Input A ADJUST PICTURE Standard Using a MENU To clear the menu To clear the menu . The menu disappears automatically if a key is not pressed for one minute. To reset items that have been adjusted Select the item that you want to reset, and then press the RESET key on the Remote Commander. “Complete!” appears on the screen and the setting of the item that you have selected is reset to its factory preset value. Items that can be reset are: • “Contrast,” “Brightness,” “Color,” “Hue” and “Sharpness” on the “Adjust Picture...” menu of the PICTURE SETTING menu • “Dot Phase,” “H Size,” and “Shift” on the “Adjust Signal...” menu of the INPUT SETTING menu Storage of the settings The settings are automatically stored in the projector memory when the ENTER key is pressed. If no signal is input If there is no input signal, “Cannot adjust this item.” appears on the screen. Unadjustable items Items that ca...
Otros modelos de este manual:Proyectores - VPL-ES7 (3.28 mb)
Proyectores - VPL-EX7 (3.28 mb)