Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
If any part is missing, contact the supplier of your AastraLink RP 540 Gateway. • AastraLink RP 540 Gateway • Power adapter • Installation Guide • Ethernet cable • Telephone line cable x 4 • Wall Mounting Kit WallMounting Template x4 Telephone Cables AastraLink 540 Gateway Install Guide Adapter Ethernet Cable Wall Mounting Kit Seting Up Your Syste m Setting Up Your System The AastraLink RP 540 Gateway can be wall-mounted or placed on a desktop. Wall-Mounted Unit The template, screws, and anchors from the wall-mounting kit are used to mount the AastraLink RP 540 Gateway on the wall. The bottom of the unit should be against the wall when mounted. 1. Use the provided template to mark locations for mounting screws. 2. Drill holes at marked locations and install anchors. 3. Apply screws to anchors. 4. Align the AastraLink RP 540 Gateway on the screws. Desktop Unit Place the AastraLink RP 540 Gateway on a flat surface. 4 AastraLink RP 540 Installation Guide Connecting to Power and the Local Area Network Connecting to Power The power adapter required for the AastraLink RP 540 Gateway is straighforward to install. • Connect the power adapter to the AastraLink RP 540 Gateway port marked , and plug the other end into an electrical outlet. Connecting to the Local Area Network Included with the AastraLink RP 540 Gateway is an Ethernet cable allowing you to connect to the local area network. • Connect the Ethernet cable to the ethernet jack marked LAN on the AastraLink RP 540 Gateway, and connect the other end to your local area network (LAN). LAN Ethernet Switch Power Connecting AastraLink RP 540 Installation Guide 5 Connecting to the Local Phone Line Connecting to the Local Phone Line The AastraLink RP 540 Gateway has 4 telephone jacks, allowing you to connect up to 4 local (FXO) phone lines. You must connect at least 1 phone line to the AastraLink RP 540 Gateway. 1. Connect one end of a telephone line cable to a local telephone line jack, and the other into a AastraLink RP 540 Gateway telephone line jack. 2. Repeat for additional phone lines, connecting up to 4 phone lines in total to the AastraLink RP 540 Gateway telephone line jacks. Telephone Line Jacks Confirm that all cables and cords are properly seated into their respective ports and outlet. You are now ready to setup the other components of the AastraLink RP system, following the appropriate Installation Guides. 6 AastraLink RP 540 Installation Guide Emergency Dialing Considerations Please read this information carefully, as it applies to calling for help in emergency situations. Power, network, or telephone service outages If there is an outage, disruption, or other degradation of the power, network, or telephone services at your location, Response Point will not work. How to dial 911 Please inform all of your employees, visitors, and Response Point users that they can either dial 911 or 9-911 to access 911 emergency services. Maintain an alternative means of calling 911 You should maintain a backup means of calling 911 emergency services (for example, by using a phone plugged into a standard telephone line or a cell phone) in case of a power failure, telephone service outage, or other problem that may inhibit you from using Response Point. 811 feature By dialing 811, you can call back the last phone that was used to dial 911. This information will be stored for only 24-48 hours after 911 is dialed. Note: This feature may not work if the phone has not been registered with the Response Point base unit by your phone system administrator. 911 location obligations that may apply to certain owners of Response Point Your telephone company may be required under applicable law to provide a telephone number and address associated with that telephone number to emergency services when a caller dials 911. Please note that certain U.S. (state and/or federal) and foreign laws may require the owner of a multiline telephone system (MLTS), such as Response Point, to provide emergency services with the physical location/address of the phone that was used to call 911, in addition to the caller’s telephone number. Compliance with such MLTS laws is your responsibility as the owner of Response Point. Response Point does not provide to emergency services the physical location/address of a phone that is used to call 911. Emergency AastraLink RP 540 Installation Guide 7 Regulatory Compliance and Safety Regulatory Compliance and Safety Information Equipment Installation WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this equipment. The equipment must be placed indoors and connected to indoor networks only. United States Class B Notice - FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and ...