Votos - 7, Puntuación media: 4.1
(
)
)
|
Resumen del manual
Or use it as ENTER key when in Keypad Configuration Adjust volume by pressing “– “or “+” 0 - 9, *, # Standard phone keypad; press # key to send call; press * key to for IVR functions MAKING PHONE CALLS Handset, Headset and Speakerphone The GXP1400/1405 allows you to make phone calls via handset, headset or speakerphone. During the active calls the user can switch between the handset, headset and the speakerphone by pressing the corresponding keys on the phone. Dual Lines with SIP Account GXP1400/1405 can support up to two lines “virtually” mapped to a SIP account. In off-hook state, select an idle line and the dial tone will be heard. To make a call, select the line you wish to use. The user can switch lines before dialing any number by pressing the LINE button. Completing Calls There are FIVE ways to complete a call: 1. DIAL: To make a phone call. • Take Handset off hook or press SPEAKER button or press HEADSET button or press an available LINE key to activate speakerphone • The line will have a dial tone • Enter the phone number • Press “#” or HANDSET button to send 2. REDIAL: To redial the last dialed phone number. • Take Handset off-hook or press the SPEAKER button or press an available LINE key to activate speakerphone or on idle screen • Press the REDIAL soft-key 3. VIA CALL HISTORY: To call a phone number in the phone’s history. • Press the MENU button to bring up the Main Menu. • Select Call History and then “Answered Calls”, “Missed Calls” or “Dialed Calls” or etc depending on your needs • Select phone number using the arrow keys • Press OK to select • Select and press “Dial” to dial out 4. VIA PHONEBOOK: To Call a phone in from the phone’s phonebook. • Go to the phonebook by pressing the DOWN arrow key or pressing the menu button and selecting “Phone Book” • Select the phone number by using the arrow keys • Press OK to select • Select and press “Dial” to dial out 5. VIA PAGE/INTERCOM: Server/PBX has to support Page/Intercom. Also, GXP1400/1405 and PBX have to be configured correctly. • Take Handset off hook or press SPEAKER button or press HEADSET button or press an available LINE key to activate speakerphone • Press OK and the screen will display “LINEx: PAGE” • Dial the number to Page/Intercom • Press “SEND” button to dial out NOTE: • Dial-tone and dialed number display occurs after the handset is off-hook, or handset button is pressed, or speaker button is pressed, or the line key is selected. After dialing the number, the phone waits 4 seconds (by default; No key Entry Timeout) before sending and initiating the call. Press “#” button to override the 4 second delay. Making Calls using IP Addresses Direct IP Call allows two phones to talk to each other in an ad-hoc fashion without a SIP proxy. VoIP calls can be made between two phones if: • Both phones have public IP addresses, or • Both phones are on a same LAN/VPN using private or public IP addresses, or • Both phones can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ) To make a direct IP call, please follow these steps: • Press MENU button to bring up MAIN MENU • Select “Direct IP Call” using the arrow-keys • Press OK to select • Input the 12-digit target IP address. (Please see example below) • Press OK key to initiate call. For example: If the target IP address is 192.168.1.60 and the port is 5062 (e.g. 192.168.1.60:5062), input the following: 192*168*1*60#5062. The “*” key represents the dot “.”; the “#” key represents colon “:”. Press OK to dial out. The GXP1400/1405 also supports Quick IP Call mode. This enables the phone to make direct IP-calls, using only the last few digits (last octet) of the target phone’s IP-number. This is possible only if both phones are in under the same LAN/VPN. This simulates a PBX function using the CMSA/CD without a SIP server. Controlled static IP usage is recommended. To enable Quick IP calls, the phone has to be setup first. This is done through the web-setup function. In the “Advanced Settings” page, set the "Use Quick IP-call mode” to “Yes”. When #xxx is dialed, where x is 0-9 and xxx <=255, a direct IP call to aaa.bbb.ccc.XXX is completed. “aaa.bbb.ccc” is from the local IP address regardless of subnet mask. The numbers #xx or #x are also valid. The leading 0 is not required (but OK). For example: 192.168.0.2 calling 192.168.0.3 -- dial #3 followed by # 192.168.0.2 calling 192.168.0.23 -- dial #23 followed by # 192.168.0.2 calling 192.168.0.123 -- dial #123 followed by # 192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3 NOTE: • If you have a SIP Server configured, a Direct IP-IP still works. If you are using STUN, the Direct IP-IP call will also use STUN. Configure the “Use Random Port” to “No” when completing Direct IP calls. ANSWERING PHONE CALLS Receiving Calls 1. Incoming single call: Phone rings with selected ring-tone. The corresponding LINE flashes in red. Answer call by taking Handset off hook or pressin...
Otros modelos de este manual:Teléfonos fijos - GXP1405 (477.33 kb)