Votos - 10, Puntuación media: 4.1
(
)
)
|
Resumen del manual
Definitions This section will describe the options in the Web configuration user interface. As mentioned, a user can log in as an administrator or end-user. Functions available for the end-user are: • Status: Displays the network status, account status, software version and MAC address of the phone, and service status. • Basic Settings: Basic preferences such as date and time settings, line keys and LCD settings can be set here. Additional functions available to administrators are: • Advanced Settings: To set advanced network settings, codec settings, XML configuration settings and etc. • Account: To configure the SIP account. Table 13: Device Configuration - Status MAC Address The device ID, in HEXADECIMAL format. IP Address This field shows IP address of GXP1400/1405. Product Model This field contains the product model information. Part Number This field contains the product part number. Software Version • Program: This is the main firmware release number, which is always used for identifying the software (or firmware) system of the phone. • Boot: Booting code version number • Core: Core code version number • Base: Base code version number • DSP: DSP code version number • Aux: Aux code version number System Up Time This field shows system up time since the last reboot. System Time This field shows the current time on the phone system. Registered Indicates whether accounts are registered to the related SIP server. PPPoE Link Up Indicates whether the PPPoE connection is enabled (connected to a modem) and the NAT type. Service Status • GUI: shows the GUI status: running or stopped • Phone: shows the phone status: running or stopped Core Dump Download core dump file for troubleshooting when necessary. Table 14: Device Configuration – Settings/Basic Settings End User Password This contains the password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters. IP Address The GXP1400/1405 operates in three modes: 1. DHCP mode: The GXP1400/1405 acquires its IP address from the first DHCP server it discovers on its LAN. The DHCP option is reserved for NAT router mode. In DHCP mode, all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory). 2. PPPoE mode: To use the PPPoE feature, set the PPPoE account settings (PPPoE account ID, PPPoE password and PPPoE service name). The GXP1400/1405 establishes a PPPoE session if any of the PPPoE fields is set. 3. Static IP mode: Configure all of the following fields: IP address, Subnet Mask, Gateway, DNS Server 1, DNS Server 2 and Preferred DNS Server. 802.1x Mode This option allows the user to enable/disable 802.1x mode on the phone. The default value is disabled. To enable 802.1x mode, this field should be set to EAP-MD5. Once enabled, the user would be required to enter the following information below to be authenticated on the network: • Identity • MD5 Password Line Keys x This allows the user to configure the account mapped to each line key, as well as enabling SCA (Shared Call Appearance) for the line. Options available for Key Mode are : 1. Line 2. Shared Line Time Zone This parameter controls the date/time display according to the specified time zone. If “Allow DHCP Option 2 to override Time Zone setting” is checked, the time zone will be overridden by the DHCP server. Self-Defined Time Zone This parameter allows the users to define their own time zone. The syntax is: std offset dst [offset], start [/time], end [/time] Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0 MTZ+6MDT+5, This indicates a time zone with 6 hours offset with 1 hour ahead which is U.S central time. If it is positive (+) if the local time zone is west of the Prime Meridian (A.K.A: International or Greenwich Meridian) and negative (-) if it is east. M4.1.0,M11.1.0 The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec) The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd Tuesday…) The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues, … ,Sat) Therefore, this example is the DST which starts from the first Sunday of April to the 1st Sunday of November. Weather Update By default, “Enable Weather Update:” is set to “Yes”. If set to “No”, weather information will not display on the phone. Settings to customize the display of weather via: • City Code – Automatic or enter city code (default is Automatic) • Update Interval – Refresh time in minutes (default is 5 mins) • Degree Unit – Select Automatic, Fahrenheit or Celsius (default is Automatic) This is displayed when “Enable Weather Update” is set to “Yes” and pressing the ‘SwitchSCR’ soft-key once. LCD Contrast Set LCD contrast. Range from 0 to 20. Time Display Format LCD time display in 12 hour or 24 hour format. Disable in-call DTMF display Default is “No”. This field is used to hide the keypad input during a call. HEADSET Key Mode Default Mode: - Toggle to Headset when using Speaker/Handset - Dial, pick up call ...
Otros modelos de este manual:Teléfonos fijos - GXP1400 (477.33 kb)