Votos - 2, Puntuación media: 3 ( )

Fabricar: AEG Tamaño del archivo: 375.72 kb Nombre del archivo: Idioma del manual:

The insulation may be damaged. • Repairs to electrical appliances should . only be carried out by a trained electrician. Improperly performed repairs may place the user at serious risk. • If your vacuum cleaper has a fault, please therefore contact your electrical retailer or the AEG Service Centre direct. • Make sure that a paper dustbag and MICROFILTER are always inserted. • Let shampooed carpeted floors fully dry. Never use your vacuum cleaner to vacuum liquids, since It may otherwise be damaged. The protection against electric shock may also be impaired. • If the appliance is wrongly operated or used for a purpose other than that for which it is intended, no liability can be accepted for any possible damage. • Never use ydur appliance to vacuum matches, glowing embers, or cigarette-ends. Avoid vacuuming hard pointed objects, since they may damage the appliance or paper dustbag. “CE” This appliance complies with the following EC Directives: - 72/23/EEC of 19. 02.1973 - Low Voltage* Directive - Ç9/336/EEC of 03. 05.1989 (including Amentment Directive 92/31/EEC) - EMV Directive. Insert handle First of all, insert the handlegrip Into the tubular handle by pressing down the locking knob, taking care that the knob comes to rest in the hole provided. Fig. 3: Insert the handle into the top of the appliance and secure it by means of the lock-nut. The handlegrip and cable clips must point backwards. Insert the electric lead into the plug aperture on the handlle next to the upper cable clip. Conversion into a hand appliance (fig. 4) Detach the handle from the appliance, separate the handlegrip from the handle tube by pressing on the knob and pulling, and insert it In the appliance in place of the handle. The handlegrip of the handle tube and the handle on the appliance enable the appliance to be used with ease and comfort on upholstery, mattrasses, etc. Fig. 5 : The nozzles are connected by pushing and twisting and disconnected by pulling and twisting. Switching on and off (fig. 6) Switch your vacuum cleaner on or off with the on/off button (A). If you have connected other electrical appliances with high connected load on the same circuit and switch them on simultaneously with your vacuum cleaner, the fuse may cut out. On the VAMPYRETTE, this can be avoided by1 setting the slide control to MIN before switching on and then controlling the setting to a higher level after switching on. 10 Power economy button and electronic suction control (depending on model) The VAMPYRETTE incorporates a high-performance blower. The suction power can be electronically controlled from MIN to MAX by means of a slide. Fig. 6/B: The power economy button ensures that your vacuum cleaner has the right degree of suction for normal everyday cleaning tasks. Should, however, more intensive vacuum cleaning be required (removing heavy dirt stains, working on smooth floors, etc.), the degree of suction can be increased to MAX. In exactly the same manner, the s...

Descargar ahora

Introduzca dos números de la imagen: