Read all the warning and safety issues below before you use the robot. 1.0.1 Danger • Do not immerse the robot, the base station or the adapter in water or any other liquid. • Do not use the robot on wet floors or in places where there is a risk of contact with water or immersion in water. • Never suck up flammable substances and do not suck up ashes until they are cold. • Do not use the robot in humid surroundings like bathrooms. • Do not use the robot in hazardous areas such as close to firepl

2 Insert two AAA 1.5-volt alkaline batteries into the battery compartment inside the handle. Note: Make sure that the - and + poles point in the right direction. 3 Reattach the battery compartment lid (1) and fasten the screw with a screwdriver (2). Preparing for use Ergonomic advice ComfortControl handgrip (specific types only) -The unique Comfor tControl handgrip is ergonomically designed to give you sufficient comfor t during vacuum cleaning. -To gain optimal benefit from this handgrip, it is

1 The suction power is insufficient. A The suction power may be set to a low setting. - Set the suction power to a higher setting. B The nozzle, tube or hose may be blocked up. -To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible) the other way around. Switch on the vacuum cleaner to force the air through the blocked-up item in opposite direction. C The dustbag may be full. -Empty the reusable dustbag (specific types only) or replace the dustbag. D The fi

The brush strip disappears into the nozzle housing. , Parquet nozzle (specific types only) -The parquet nozzle is designed for gentle cleaning of hard floors. Crevice tool, small nozzle and small brush 1 Connect the crevice tool (1), the small nozzle (2) or the small brush (specific types only) (3) directly to the handgrip or to the tube. accessory holder 1 2 Snap the accessory holder onto the handgrip. Snap two accessories into the accessory holder: English 11 -Crevice tool and small nozzle. No

que hayan quedado atrapados en el cepillo. Quite las pelusas, pelos y cualquier otro tipo de suciedad del cepillo. sustitucion El enchufe debe retirarse de la toma antes de la limpieza omantenimiento del aparato. Sustitucion de los filtros Reemplace el filtro HEPA del deposito del polvo y el filtro de salida HEPA cada 12 meses. Filtros hEpa -Para extraer el filtro antiguo y sustituirlo por uno nuevo, siga las instrucciones para sacar y colocar los filtros del apartado “Limpieza y mantenimiento”.