Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
w Display e Right (Zone Up) key Press to increase the zone number (Default setting). Also press to increase setting adjustments. r Left (Zone Down) key Press to decrease the zone number (Default setting). Also press to decrease setting adjustments. t VOL (Volume) control Rotate clockwise to increase the volume level. Rotate counterclockwise to decrease the volume level. y DTMF keypad Press the keys on the keypad to make DTMF calls. The default setting is None (no function). u Up (Channel Up) key : PF 6 (Programmable Function) key Press to increase the channel number (Default setting). Your dealer can also enable the CH key to be used when making setting adjustments, as an optional method for using the Right key. i Down (Channel Down) key :PF 7 (Programmable Function) key Press to decrease the channel number (Default setting). Your dealer can also enable the CH key to be used when making setting adjustments, as an optional method for using the Left key. o S / A / B / C / Orange (Programmable Function) keys Press to activate their programmable functions. The default setting is None (no function). !0 TX/ BUSY indicator The TX/ BUSY indicator lights red while transmitting and green while receiving. . PTT (Push-To-Talk) switch Press and hold this switch, then speak into the microphone to call a station. . HOOK Key name (function) comparison (in regards to the KCH-14/ KCH-15) Indicator Description Displays the operating zone and channel numbers or zone and channel names. Also displays various text messages depending on the function being used. Displays various characters depending on dealer settings. Appears when a received call is using optional signaling. Appears when the Monitor function is active and when the transceiver squelch is open. Appears when you are using Scan mode. Appears when the external speaker function is activated. Appears when the Scrambler or Encryption function is activated. Appears when the AUX A function has been activated. Appears when the AUX B function has been activated. Appears when the AUX C function has been activated. Appears when using the Operator Selectable Tone function. Appears when there is a FleetSync message stored in the transceiver memory. Flashes when a new FleetSync message has arrived. Appears when the selected zone (left icon) or channel (right icon) is added to the scanning sequence. Appears when the Auto Recording function on the VGS-1 option is activated. Appears when the Auto Reply Message on the VGS-1 option is activated. (The location of this icon is the same as the Auto Recording icon.) The numbers of bars indicates the strength of incoming signals. The antenna plus 3 bars represents a strong signal while only the antenna represents a weak signal. No antenna means no signal is present. Flashes when out of range. • Use of the KCH-16/ transceiver while you are driving may be Display against traffic laws. Please check and observe the vehicle regulations in your area. • Do not use options not specified ...
Otros modelos de este manual:Radios - KCH-15 (1.16 mb)
Radios - KCH-16 (1.16 mb)