Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Cortelco Tamaño del archivo: 107.4 kb Nombre del archivo: CP4400_manual.pdf Idioma del manual:

(Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.) • If the telephone has been dropped or the housing damaged. • If the telephone exhibits distinct change in performance. SAVE THESE INSTRUCTIONS 5 TELEPHONE PART IDENTIFICATION S peak er 9 Dial K ey s M ic S tatus LE D 10 V olum e Down B utton M em ory Dial K ey 11 V olum e S tatus LE D M em ory Dial LE D 12 V olum e Up B utton HO LD B utton 13 M UTE B utton RE DIA L B utton 14 S TO RE B utton O N/O F F LE D 15 M ic S tatus LE D O N/O F F B utton 16 F LA S H B utton 6 INSTALLATION Checklist of Parts • Conference Unit • AC Adapter • User’s Guide • RJ 45 Cable (8 wire) • RJ 11 Cable (4 wire) • Junction Box Note: If any of the parts are missing, please contact your dealer. To Ensure Best Performance • Locate the unit in a quite environment. Avoid making calls in noisy environments. • Keep papers and other objects away from the unit. • Do not place on carpet or other similar surfaces. • Make sure that the unit is at least 1 meter away from other electrical products to avoid interference. • Direct your voice toward the microphone. • Do not move the unit during a call. Connect to Power and Telephone Line 1 Connect the 8 wire cable to the EXT jack on the junction box and to the EXT jack on the bottom of the telephone. 2 Connect the 4 wire phone line cable to the telephone jack and to the LINE jack on the junction box. 3 Plug the AC power supply into an electrical outlet and into the junction box. The LEDs will flash and the phone will beep when it is ready. 7 SETUP NOTE: In all the setup menus, the chosen item will blink. Set the Date and Time 1 With the phone on hook, press the MUTE button. The screen will display 1. SET DATE 2 Press the MUTE button again. The year will begin to flash. 3 Use VOL+ and VOL- to adjust the year. 4 Press the MUTE button. The month will begin to flash. 5 Use VOL+ and VOL- to adjust the month. 6 Press the MUTE button. The day will begin to flash. 7 Use VOL+ and VOL- to adjust the day. 8 Press the MUTE button. The hour will begin to flash. 9 Use VOL+ and VOL- to adjust the hour. 10 Press the MUTE button. The minute will begin to flash. 11 Use VOL+ and VOL- to adjust the minute. 12 Press the MUTE button. The weekday will begin to flash. 13 Use VOL+ and VOL- to adjust the weekday. 14 Wait a few seconds and the time and date will be stored. Set the Flash Time 1 With the phone on hook, press the MUTE button. The screen will display 1. SET DATE 2 Press the VOL+ button. The screen will display 2 SET FLASH. 3 Press the MUTE button. The screen will display FLASH and the flash time. 4 Use VOL+ and VOL- to adjust the flash time. Note that 600 is the standard flash time for the United States and Canada. 5 Press the MUTE button. The screen will display 2 SET FLASH. 6 Wait a few seconds and the screen will go to idle and display the date and time 8 Set the Display Contrast 1 Wi...

Descargar ahora

Introduzca dos números de la imagen: