Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
The next message is played. STOP (During playback) 0 • Playback is stopped temporarily. •To resume playback, press (9] again within 15 seconds, or the voice menu will start. ERASING A SPECIFIC MESSAGE (During playback) * 4 •The current message is erased. •A short beep will sound and the next message is played. ERASING ALL MESSAGES ®(H •All of the recorded messages on the selected line(s) are erased. •A long beep will sound and "Line I, no messages” and/or “Line 2, no messages” are/is heard. {continued *) Remote Operation with the Handset PAGER CALL ON/OFF 0 • Each time you press (3), “on/off" is heard and the mode will turn on/off. • If you did not store a pager number, 6 beeps will sound and the mode will not turn on. ANSWERING SYSTEM OFF 0 •“Answer off’ is heard and the SCREEN/ PLAYBACK indicator flashes. •The answering system for the selected line(s) is turned off. •The voice menu will start. To end the remote operation, press f SCREEN/PLAYBACK). To operate another line or both lines, select the line(s) (see below). Then enter the desired direct commands. ANSWERING SYSTEM ON 0 •The answering system for the selected line(s) turns on. •The SCREEN/PLAYBACK indicator lights. SELECTING ANOTHER LINE @0 • LINE 1 is selected and the number of new messages on LINE 1 is heard. @0 • LINE 2 is selected and the number of new messages on LINE 2 is heard. @0 • LINE 1 and LINE 2 are selected and the number of new messages on both lines is heard. 60 ANSWERING SYSTEM ON FOR THE LINE(S) » •“Answer set line 1" is heard and the LINE 1 answering system is turned on. r~m m »“Answer set line T is heard and the LINE 2 answering system is turned on. ►“Answer set line I and line 2” is heard and the answering system for both lines is turned on. • If the LINE 1 (LINE 2) answering system is on and you also want to turn on the LINE 2 (LINE 1) answering system, press («] ©®- + Remote Operation with the Handset Monitoring incoming calls with the handset When an incoming message is being recorded, the SCREEN/PLAYBACK indicator flashes slowly. 1. Press (SCREEN/PLAYBACK ]. •The indicator lights and you can listen to the incoming call. •To answer the call, press the line button whose indicator lights. The recording is stopped. 2. When finished monitoring the call, press [SCREEN/PLAYBACK], Recording your telephone conversation with the handset 1. During a conversation with the handset, press (PR0GRAM/2WAY REC). •The SCREEN/PLAYBACK indicator lights. 2. Continue your conversation. 3. When finished recording the conversation, press (PRQGRAM/2WAY RECl. •The SCREEN/PLAYBACK indicator light goes out. •The conversation is recorded on the line you were using. • If you record a conference call {p. 32), the conversation is saved on LINE 1. Many states have imposed regulations on the manner in which 2-way telephone conversations may be recorded, so you should inform the other party that the conversation is being recorded. Consult your local telephone company for further information. 62 Remote Operation Card OPERATION WITH THE HANDSET (D(D(D *•REPEAT SKIP** PACER /ghi\ /jkl\ /mno\ (Jf) NEW MSG AlTSsC ©/tuv\ /wxvz\ [T) (J) TONE ANS OFF G33À HOLD LOUD REDIAL lO O O Cl n ISTERCOU RINGER PAUSE FLASH AUTO PRQQBM CO Cj COCj Press SCREEN/PLAYBACK. To select LINE 1, press @0. To select LINE 2, press @0. To select LINE 1 and LINE 2, press @0. Enter the desired direct commands (see the reverse side). SCREEN/ PLAYBACK ► If the SCREEN/PLAYBACK indicator flashes when you press SCREEN/ PLAYBACK, the answering system is off. To turn it on, press 0. To end the remote operation, press SCREEN/PLAYBACK. OPERATION FROM A TOUCH TONE PHONE [ Call your unit. ) •When you press a button, press firmly. 6 + Remote Operation Card No. Direct Command 1 Repeat the message 2 Skip the message 3 Pager call on/off 4 New message playback 5 All message playback 8 Answer on 9 Stop 0 Answer off *4 Erasing a specific message *5 Erasing all messages #1 Selecting LINE 1 #2 Selecting LINE 2 #0 Selecting LINE 1 and LINE 2 #18 Answer on for LINE 1 #28 Answer on for LINE 2 #08 Answer on for both lines •To monitor incoming calls: When the SCREEN/PLAYBACK indicator flashes slowly, press SCREEN/PLAYBACK. When finished, press SCREEN/PLAYBACK again. To answer the call, press the line button whose indicator lights. •To record a telephone conversation: Press PROG RAM/2 WAY REC When finished, press PROGRAM/2WAY REC again. No. Direct Command 1 Repeat the message 2 Skip the message 3 Pager call on/off 4 New message playback 5 All message playback 7 Recording your greeting 9 Stop 0 Answer off * Greeting message skip *4 Erasing a specific message *5 Erasing all messages #1 Selecting LINE 1 #2 Selecting LINE 2 #0 Selecting LINE 1 and LINE 2 No. Direct Command #18 Answer on for LINE 1 #28 Answer on for LINE 2 #08 Answer on for both lines •To turn on the answering system on the line you are callin...