Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
• To exit remote operation mode, press [OFF]. Erasing all messages All recorded messages, except the greeting message, can be erased at one time. Base Unit 1 Press [ERASE] while the base unit is not being used. •“To erase all messages, press ERASE again” is heard. 2 Within 10 seconds, press [ERASE] again. • The unit beeps, then announces “No messages”. • The base unit display shows “0”. Handset 1 Press [MENU]. 2 Press Select at “Message play”. 3 Press [*] [5]. • The unit beeps, then announces “No messages”. • To end remote operation, press [OFF]. • Information in the Caller List will not be erased. To erase caller information, see page 33. Remote Operation from a Touch Tone Phone While outside, you can operate the Answering System from any touch tone phone. A synthesized voice menu will guide you through the Answering System (p. 57). • To skip the voice menu and operate the unit directly, see page 58. Summary of remote operation Call your unit from a touch tone phone. u Enter your remote code (p. 56) during or after the greeting message. • The number of new messages is heard, and the new messages will be played.* u After 3 seconds, the voice menu will start (p. 57). Follow the menu or enter direct commands (p. 58). u To end remote operation, hang up. • The unit will announce the remaining recording time after playback if it is less than 3 minutes. • The messages are saved. * If “No new messages” is announced, the unit has only old messages. If “No messages” is announced, the unit has no messages. Answering System For assistance, please call: 1-800-211-PANA(7262) 55 Remote Operation from a Touch Tone Phone Remote Code Handset The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99) for your remote code. The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. Initial setting KBack dB Select L 3 Press Select at “Set answering”. Set answering KBack dB SelectL 4 Scroll to “Remote code” by pressing [d] or [B], then press Select. Remote code KBack dB SelectL 5 Enter a 2-digit remote code (00–99). Remote code :11 KBack SaveL 6 Press Save, then press [OFF]. To confirm the remote code, repeat steps 1 to 4. • The remote code is displayed. When finished, press [OFF]. Remote Operation from a Touch Tone Phone Voice Menu The shaded parts are voice prompts. Press 1 to play back new messages. Press 2 for other functions. Press 1 to record your message. Press 2 for other functions. Please leave your message. New Message Playback. Press 1 to play back all messages. Press 2 for other functions. All Message Playback. Press [1]. Press [1]. Press [1]. Press [2]. Press [2]. Press [2]. All recorded messages are played back. At the end of the last message, “End of final message” is heard. Only new messages are played back. At the end of the last message, “End of final message” is heard. 1. Talk after the long beep. 2. When you finish recording a memo message, hang up. Press 1 to erase all messages. Press 2 for other functions. Press [1]. A long beep sounds and “No messages” is heard and all recorded messages are erased. Press [2]. • 3 seconds after playback, the voice menu will start again from the beginning. • The unit will announce the remaining recording time after playback if it is less than 3 minutes. • If you hear “Memory full” after playback, erase unnecessary messages (p. 58). • If you do not press any buttons within 10 seconds after a voice prompt, “Thank you for your call.” will be heard and the call will be disconnected. Answering System For assistance, please call: 1-800-211-PANA(7262) 57 Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end remote operation, hang up at anytime. Direct commands [4] : Plays back new [*] [4] : Erases the current messages. message. [5] : [1] : Plays back all messages. Repeats the current message. • If pressed within the first 5 seconds of playback, the previous message will be played. [*] [5] : [0] : • A short beep will sound and the next message will be played. Erases all messages. • A long beep will sound and “No messages” will be heard. Turns off the Answering [2] : Skips the current message. System. • The unit hangs up. [9] : Stops the current operation. • To resume, enter a direct command within 15 seconds, or the voice menu will start (p. 57). To turn on the Answering System: Call your unit and wait for 15 rings. • The unit will answer and the greeting will be played. • The Answering System will be turned on. Hang up or enter the remote code for other options. • When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options. Skipping the greeting After calling your unit,...