Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
28). To store the number in the directory, press OK (►)• Follow the instructions on the display (see page 30, from step 3). © © ^ Using the Caller List Storing Caller List Information in the Directory You can store numbers that are in the Caller List into the directory. Make sure that the handset is in the stand-by mode. H Lift the handset off the base unit. 1 OR If the handset is off the base unit, press (▼) or (X) to enter the list. p Press ® or ® repeatedly to find the caller ^ you want to store in the directory. Press OK 0. • If the number requires editing, see page 29. O While the arrow points to “Save ^ directory” press OK ®. 10 new calls v=New A=Old CINDY TURNER 1-234-456-7890 11:20A JAN12 X3 ►Save directory Clear va OK=Yes If there is no name information for the caller, “Enter name” will be displayed. a) If a name is not required, press OK (►] (Save key). b) If a name is required, enter the name (p. 34). When finished, press OK ® (Save key). • A beep sounds. • The display will return to step 2. You can continue storing other items. To return to the stand-by mode, press l ÉXIT/CH1 or wait for 60 seconds. Enter n name L. * #=<—> OK=Save Enter name CINDY TURNER *#=*—> OK=Save • You can exit the programming mode any time by pressing lEXlT/CHl. • If the display shows “Memory is full” in step 3, the display will return to step 2. Press I EXlT/CHl to exit the list. To erase other stored items from the directory, see page 39. • You cannot store caller information in the directory if a phone number is not displayed. 30 Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries. Make sure that the handset is in the stand-by mode. To erase a specific caller from the Caller List 1 2 3 Lift the handset off the base unit. OR If the handset is off the base unit, press ® or ® to enter the list. Press ® or (a) repeatedly to find the caller you want to erase from the caller list. Press OK B. Press Q or (X) to select “Clear". ^ Press OK (►) (Yes key). • A beep sounds and the information is erased. • After a few seconds, the display will show the previous caller information. • To return to the stand-by mode, press (EXIT/CHl or wait for 60 seconds. To erase all entries in the Caller List 1 2 3 Lift the handset off the base unit. OR If the handset is off the base unit, press ® or ® to enter the list. Press OK (►)• Press ® or (X) to select “All clear”. 10 new calls v=New A=01d TOM REAGAN 444-5555 12:20A JAN12 V Save directory ►Clear va OK=Yes Clear Make sure this display is shown. 0 new call v=New A=01d A Press OK ® (Yes key). ^ • A beep sounds and all entries are erased. • The handset will return to the stand-by mode. Exit ►All clear va OK=Yes All clear 31 Using the Directory You can store up to 30 names and phone numbers in the directory. All directory items are sorted by the first word in alphabetical order. Using the directory, you can make a call by selecting a name on the handset display. Storing Names and Numbers in the Directory Make sure that the handset is in the stand-by mode. 32 Press I FUNCTION/EDIT). Press ® or (T) repeatedly until the arrow points to “Program”. Press OK ® {Yes key). While the arrow points to “Save directory”, press OK [►) (Yes key). Enter a name up to 15 characters with the dialing buttons, (*) (<~) or (?) (^). • See the steps for entering names and symbols (p. 34). • If a name is not required, press OK (V) (Next key) and go to step 6. Press OK (►) (Next key). Enter a phone number up to 22 digits. • If you misdial, press BACK Digits are erased from the right. Press OK (V) (save key). • A beep sounds. • The display will return to step 2. You can continue storing other items after pressing OK {►) (Yes key). • To return to the stand-by mode, press [EXIT/CHl or wait for 60 seconds. Ringer volume ►Program va OK=Yes ►Save directory Set flash time va OK^Yes Directory= 20 items Enter name Ij *#=<—> OK^Next Enter name Tom Jones *#=<—» OK=Next Tom Jones 0987654321 Enter phone no. 0987654321' . OK=Save • If a pause is required for dialing, [PAUSE] can be stored in a phone number counting as one digit (p. 46) in step 6. • You can exit the programming mode any time by pressing (EXIT/CHl. • If the display shows “Memory is full” in step 3, the handset will return to the function list. Erase other stored items from the directory (p. 39). ^ Using the Directory Steps for Entering Names and Symbols The handset dialing buttons can be used to enter letters and symbols. Each button selects a character as shown below. Number of times key is pressed Keys 1 2 3 4 5 6 7 8 9 10 11 a # & ’ ( ) * . - / 1 © A B c a b c 2 © D E F d e f 3 @ G H I 9 h i 4 © J K L j k I 5 m M N O m n 0 6 0 P Q R S P q r s 7 © T U V t u V 8 © w X Y Z w X y z 9 © 0 Blank To move the cursor C to the left. To move...